Manual Garmin GPSMAP 1000 serie (page 20 of 60) (English)

657707

Zoom out

Zoom in

1/60

Select NAV INFO

> User Data > Waypoints

Select a waypoint.

Select

Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To

• To use Auto Guidance, select Auto Guidance.

Review the course indicated by the magenta line.

NOTE:

When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

Select NAV INFO

> User Data > Waypoints

Select a waypoint or an MOB.

Select Review

> Delete

Deleting All Waypoints

Select NAV INFO > User Data >

Clear User Data >

Waypoints > All

Setting and Following a Direct Course Using Go To

CAUTION

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location

to a selected destination.

Select a destination (Destinations, page 11).

Select Navigate To

> Go To

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your current location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Routes

Creating and Navigating a Route from Your Present

Location

You can create and immediately navigate a route on the

Navigation chart or the Fishing chart. This procedure does not

save the route or the waypoint data.

NOTE:

The offshore Fishing chart is available with premium

charts, in some areas.

From the Navigation chart or Fishing chart, select a

destination.

Select SELECT > Navigate To >

Route To

Select the location of the last turn before the destination.

Select SELECT >

Add Turn

If necessary, repeat step 3 and 4 to add additional turns,

working backward from the destination to the present location

of your vessel.

The last turn you add should be the first turn you make,

starting from your present location. It should be the turn

closest to your vessel.

Select SELECT > Done.

Review the course indicated by the magenta line.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The

starting point can be your present location or another location.

Select NAV INFO

> User Data > Routes > New > Route

Using Chart

Select the starting location of the route.

Select SELECT > Add Turn.

Select the location of the next turn on the chart.

Select SELECT

> Add Turn

The chartplotter marks the location of the turn with a

waypoint.

If necessary, repeat steps 4 and 5 to add more turns.

Select SELECT > Done.

Viewing a List of Routes and Auto Guidance Paths

Select NAV INFO

> User Data > Routes

If necessary, select

Filter to see routes only or Auto

Guidance paths only.

Editing a Saved Route

You can change the name of a route or change the turns the

route contains.

Select NAV INFO

> User Data > Routes

Select a route.

Select Review >

Edit Route

Select an option:

• To change the name, select Name, and enter the name.

• To select a waypoint from the turn list, select Edit Turns >

Use Turn List, and select a waypoint from the list.

• To select a turn using the chart, select Edit Turns > Use

Chart, and select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

Select NAV INFO

> User Data > Routes

Select a route.

Select

Navigate To.

Select an option:

• To navigate the route from the starting point used when

the route was created, select

Forward.

• To navigate the route from the destination point used

when the route was created, select Backward.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

12 Navigation with a Chartplotter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 1000 serie in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 1000 serie

Garmin GPSMAP 1000 serie Installation Guide - English - 8 pages

Garmin GPSMAP 1000 serie Installation Guide - German - 8 pages

Garmin GPSMAP 1000 serie User Manual - German - 70 pages

Garmin GPSMAP 1000 serie User Manual - Dutch - 66 pages

Garmin GPSMAP 1000 serie User Manual - French - 58 pages

Garmin GPSMAP 1000 serie Installation Guide - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin GPSMAP 1000 serie Manual

Product: