13381
15
Zoom out
Zoom in
Previous page
1/98
Next page
5
Getting Started
Initializing the Receiver
,
To graphically initialize the GPS 152:
1. Press the MENU key twice for the Main Menu. Press UP or DOWN on the ARROW KEYPAD until
the GPS tab is highlighted, then press the MENU key once.
2. Using the ARROW KEYPAD, highlight Initialize Position and press ENTER/MARK to initialize
the receiver from the map. The Initialize Position Page will appear, prompting you to select your
approximate location with the map cursor.
3. Use the ARROW KEYPAD to move the map cursor and point to your approximate location within
200 miles. If you have dif culty identifying your position, press and release the IN key to zoom in
to see the next lower map scale.
4. Once you have determined your approximate location on the map, press the ENTER/MARK key.
NOTE: This does not “calibrate” the unit in any way, but rather helps to speed up the
initial satellite acquisition. If the unit switches to the Map Page or displays 2D or 3D
Navigation during this process, it is not necessary to initialize the unit.
The GPS 152 will now begin searching for the appropriate satellites for your region and should
acquire a x within a few minutes. When viewing the Satellite Status page, a signal strength bar for
each satellite in view will appear on the top middle of the page, with the appropriate satellite number
under each bar. The progress of satellite acquisition is shown in three stages:
No signal strength bars the receiver is looking for the satellites indicated.
Hollow signal strength bars the receiver has found the indicated satellite(s) and is collecting data.
Solid signal strength bars the receiver has collected the necessary data and the satellite(s) are
ready for use.
Once the receiver has collected information from at least three satellites, the top of the screen will
display either 2D or 3D Navigation, and the GPS 152 is ready for use.
Point to your approximate location
and press ENTER/MARK.
A satellites strength bar will turn black
when its ready for use.
A Lost Satellite Reception message appears
on any screen if the navigation signal is lost.
152 Manual Part 1.indd 5 11/27/2002, 2:55:47 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS152 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPS152

Garmin GPS152 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info