13383
20
Zoom out
Zoom in
Previous page
1/74
Next page
EZinit Option Prompt
The Satellite Page also provides access to the EZ
init
prompt whenever a position fix has not been calculated.
(The unit must be in searching, AutoLocate, acquiring,
simulator, or poor coverage mode.) This allows you to
reinitialize the unit (see Appendix A), and is useful if
you have traveled over 500 miles with the receiver off
and must initialize your new position. (The EZ
init
prompt will automatically appear if the receiver needs
to be initialized. The prompt may also appear during
normal use if the antenna is blocked from receiving
satellite signals.
Note: The GPS 126/128 features an internal lithium
battery that will maintain the unit’s memory when the
receiver is not running.
Memory Erase Function
You may erase the GPS 126/128’s memory in four
quick steps. This will cause all stored data to be deleted,
including routes, waypoints, and the track log.
To erase all stored data:
1. Ensure that the GPS 126/128 is turned off.
2. While holding down the
M
key, press the
P
key
to turn the unit on. After the unit turns on, release the
keys. A warning message will appear with “Yes?”
highlighted, and ask you to confirm your selection.
3. If you do not wish to erase all stored data, press
R
and
F
to cancel the emergency erase.
4. If you do wish to complete the emergency erase, press
F
to confirm.
Position Page
The second page in the GPS 126/128’s main page
sequence is the Position Page. This page shows you
where you are, what direction you’re heading, and how
fast you’re going. The Position Page is most useful when
you are traveling without an active destination way-
point. The graphic compass tape across the top of the
page indicates the direction you’re heading (only while
you’re moving).
EZinit Prompt
and Memory
Erase
REFERENCE
16
Upon activating the
Memory Erase Function,
you will be asked to con-
firm your decision.
If you travel more than
500 miles with the receiv-
er off, reinitialize the unit
to your new position by
using the EZinit feature.
To access EZinit, press
ENTER from the Satellite
Page before any satellites
are acquired.
126/128 Manual (new) 6/15/98 9:51 AM Page 16
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS128 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info