13383

Garmin GPS128 Manual

12
Zoom out
Zoom in
Previous page
1/74
Next page
Getting Started Tour
Now that you are familiar with the primary pages,
it’s time to take a tour. This is a live tour and is to be
conducted with your unit installed and with the boat in
the water. The tour will take you through the receiver’s
basic features and functions as you move about on the
water and assumes that the GPS 126/128 is turned on
and initialized, (see page 52 for initialization proce-
dure) and that you have not changed any of the factory
settings (units of measure, selectable fields, etc.). If
these settings have been changed, the pictures and
descriptions in this manual may not match what you
see on your screen.
Navigation Simulator
If you are not able to take the Getting Started Tour
with your boat in the water, you may use the built-in
navigation simulator to practice using the GPS
126/128. To use the simulator, see page 51.
Marking a Position
To begin the tour, let’s take the position you have
acquired (either by just initializing the unit or by hav-
ing turned the unit on) and mark it as a waypoint for
future reference.
1. Press the
M
key to capture and hold your position.
To mark a position, you must have obtained a
2D or 3D fix, or have the receiver in simulator
mode. If you try to mark a position without a
position fix, you will be alerted with a ‘No GPS
Position’ message.
The mark position page will appear, showing the
captured position and a default 3-digit waypoint name.
Let’s change the default name to something a little more
meaningful, like ‘DOCK’.
2. Press the down arrow once to move the field highlight
from the ‘SAVE?’ field to the name field.
Power On &
Marking a
Position
GETTING
STARTED
8
The Welcome Page will
be shown while the unit
conducts a self test.
Press the UP arrow to
move forward through the
alphabet or numbers and
the DOWN arrow to
move backward.
!
126/128 Manual (new) 6/15/98 9:50 AM Page 8
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS128 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info