13379

Garmin GPS126 Manual

56
Zoom out
Zoom in
Previous page
1/74
Next page
52
Initializing for First-Time Use
The GPS 126/128 typically acquires a position so
fast that initialization is automatic. However, initializa-
tion will be necessary for the following:
• After memory loss
• When the receiver has been moved more than
500 miles with the power off
Additionally, it may be necessary to initialize the
unit the first time you use it, if it does not acquire a fix
in a few minutes.
The receiver is shipped from the factory in
AutoLocate™ mode, which enables the GPS 126/128 to
determine its location anywhere in the world. To speed
up the initialization process, we recommend using the
graphic initialization described below.
To turn the GPS 126/128 on:
1. Press and hold
P
until the receiver turns on.
The welcome page will be displayed while the unit
conducts a self test.
Once testing is complete, the welcome page will be
replaced by the Satellite Page, with the EZinit prompt
ready for you to select one of two initialization
methods:
•Select Country––allows you to initialize the
receiver by selecting your present position from a
list of countries in the GPS 126/128’s internal data-
base. This may speed up the initialization process.
•Autolocate
TM
––allows the GPS 126/128 to initial-
ize itself and calculate a position fix without know-
ing your present position. This usually provides a
position fix in 3-5 minutes.
If the EZinit prompt has not automatically
appeared on the Satellite Page:
1. Press the
F
key.
Note: If the EZinit prompt ever appears after you
have initialized the receiver (due to the antennas view
of satellites being obstructed by trees, etc.), highlight
the ‘no re-init’ selection with the arrow keypad and
press
F
.
Initialization
APPENDIX A
Welcome Page
The EZinit prompt will
automatically appear if
the receiver needs to be
initialized. The prompt
may also appear during
normal use if the antenna
is shaded.
126/128 Manual (new) 6/15/98 9:51 AM Page 52
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS126 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info