13379
53
Zoom out
Zoom in
Previous page
1/74
Next page
To change the unit of measure:
1. Highlight the ‘units’ field, and press
F
.
2. Select the desired unit of measure, and press
F
.
Speed Filter
The speed filter allows you to determine how the
GPS 126/128 responds to changes in track or ground
speed. Three settings are available: automatic, on, or
off. The ‘Auto’ setting is the default and will monitor
changes in your current track and speed and adjust the
receiver’s response time automatically. The ‘On’ setting
allows you to manually enter a response time up to
300 seconds. Selecting a higher setting may be desir-
able in slow-speed applications with frequent changes
in track.
To enter a value for the speed filter:
1. Highlight the ‘SPEED FILTER’ field and press
F
.
2. Select the ‘ON’ option and press
F
.
3. Highlight the “speed value” field and press the
F
key.
4. Use
U
and
D
to select the desired number of
seconds.
5. Press the
F
key to confirm the selection.
Magnetic Heading Reference
The GPS 126/128’s heading information can be dis-
played referencing magnetic north (automatic or user-
defined), true north, or calculated grid headings. The
default setting is automatic magnetic north, which is
suitable for most applications.
To select a heading reference:
1. Highlight the ‘heading’ field, and press
F
.
2. Select the desired heading preference, and press
F
.
To enter a user-defined magnetic heading:
. 1. Select ‘User Mag’ and press
F
.
2. Press
F
, enter the degrees and direction of mag-
netic variation, then press
F
.
49
REFERENCE
Speed Filter and
Magnetic
Heading
To enter a user-defined
magnetic variation, select
the ‘User Mag’ option and
enter the desired direction
and value.
The number entered repre-
sents a window of time the
GPS 126/128 considers in
adjusting to changes in
speed and track. For exam-
ple, if 12 seconds is entered,
the speed displayed will
constantly represent the
speed averaged over the last
12 seconds.
126/128 Manual (new) 6/15/98 9:51 AM Page 49
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS126 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info