13379
49
Zoom out
Zoom in
Previous page
1/74
Next page
To enter a DGPS beacon frequency:
1. Highlight the ‘freq’ field, and press
F
.
2. Enter the desired frequency, and press
F
.
3. Highlight the ‘rate’ field, and press
F
.
4. Select the desired transmission rate, and press
F
.
Note: The ‘freq
and ‘rate’ fields are active only
when the interface is set to RTCM/NMEA.
When the GPS 126/128 is receiving DGPS correc-
tions from the GBR 21, the ‘beacon receiver’ section of
the I/O setup page will display the beacon frequency
and signal strength, as well as the distance from the
transmitter to the beacon receiver. At the bottom of the
beacon receiver field, a status message will keep you
informed of DGPS activity:
• A ‘Tuning’ message will be displayed while a bea-
con signal is being tuned.
• Once the beacon signal has been tuned, a
‘Receiving’ message will be displayed.
• If a beacon signal is tuned and no corrections are
being received, a ‘No Data’ message will be dis-
played.
• If a beacon signal cannot be tuned, a ‘No Status’
message will be displayed.
The message page will alert you to any problems
relating to DGPS operation. You may also monitor the
DGPS status from the status field on the interface page.
The GPS 126/128 will display one of three alert mes-
sages concerning DGPS operation:
No DGPS Position—
there is not enough data
available to compute a DGPS position.
No RTCM Input—
the beacon receiver is not
properly connected or the baud rates do not
match.
RTCM Input Failed—
DGPS data was being
received but has been lost.
45
REFERENCE
DGPS Interface
Choose an interface
option based upon what
equipment you are using
to transfer information.
Once the RTCM/NMEA
option is selected, you can
manually tune the beacon
receiver from the frequen-
cy field.
126/128 Manual (new) 6/15/98 9:51 AM Page 45
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS126 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info