522229
85
Zoom out
Zoom in
Previous page
1/96
Next page
Oscillator Needs AdjustmentThe GPSMAP 180 has detected excessive drift in
its internal oscillator, which may result in longer acquisition times. Take the
unit to an authorized GARMIN service center for adjustment.
Poor GPS CoverageThe GPSMAP 180 cannot acquire the necessary number
of satellites to compute a position.
Power Down and Re-initThe GPSMAP 180 cannot calculate a position due to
abnormal satellite conditions. Power down and verify the last position shown by
other means.
Proximity AlarmYou have entered the alarm radius for the proximity way-
point indicated.
Proximity List FullYou have used all nine proximity waypoints.
Proximity Overlaps Another Prox WyptThe alarm radius specified overlaps
the area specified for another proximity waypoint.
RAM has FailedThe random access memory has failed and the unit is not
operable. Take your unit to an authorized GARMIN service center for repairs.
ROM has FailedThe units permanent memory has failed and the unit is not
operable. Take your unit to an authorized GARMIN service center for repairs.
Received Invalid WaypointA waypoint was received during upload transfer
that has an invalid identifier.
Receiver has FailedA failure in receiver hardware has been detected. If this
message persists, do not use the unit and take it to an authorized dealer for
repair.
Route Already ExistsThe route number you are trying to copy to is already
used.
Route Does Not ExistThe route number you are trying to use or copy is not
defined.
Route is FullYou have attempted to add more than 30 waypoints to a route.
Route Memory is FullYou have attempted to create more than 20 routes.
Route Waypoint was DeletedA route waypoint entered does not exist in the
database and has been deleted from the route.
73
SECTION
C
APPENDIX
Messages
RTCM Input has FailedDGPS data being received has been lost. You are no longer
receiving the beacon signal.
Searching the SkyThe GPSMAP 180 is searching the sky for almanac data.
Stored Data was LostAll waypoints, routes and almanac data has been lost due to
internal battery failure.
There is No RTCM InputThe beacon receiver is not properly connected or baud rates
do not match.
Timer Has ExpiredThe countdown timer has expired.
Track Memory is FullThe track memory is full and no additional track plot will be
recorded until the track memory has been cleared or set to wrap mode.
Wypt Already ExistsThe waypoint name youve entered already exists in memory.
Waypoint Memory is FullYou have used all 250 waypoints in the GPSMAP 180 system.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS MAP 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS MAP 180 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info