589666
52
Zoom out
Zoom in
Previous page
1/66
Next page
Interface Setup: DGPS (continued)
To enter a DGPS beacon frequency:
1. Highlight the ‘FREQ’ field, and press .
2. Enter the desired frequency, and press .
3. Highlight the ‘RATE’ field, and press .
4. Select the desired bit rate (bps), and press .
Note: The frequency and bit rate fields are disabled
when the ‘RTCM/NONE’ option is selected.
When the GPS 12XL is receiving DGPS corrections
from the GBR 21, the ‘BEACON RECVR’ section of the
I/O setup page will display the beacon frequency and
signal strength, as well as the distance from the beacon
transmitter to your present position. At the bottom of
the beacon receiver field, a status message will keep you
informed of DGPS activity:
• A ‘Tuning’ message will be displayed while a bea-
con receiver is selecting a frequency/bit rate and
waiting for signal reception.
Once a valid beacon signal has been received, a
‘Receiving’ message will be displayed.
If the beacon signal is received and no correction
data is being received, a ‘No Data’ message will be
displayed.
If a beacon frequency cannot be tuned and/or no
signal is received, a ‘No Status’ message will be
displayed.
The message page will alert you to any problems
relating to DGPS operation. You may also monitor the
DGPS status from the status field on the interface page.
The GPS12XL will display one of three alert messages
concerning DGPS operation:
No DGPS Position— there is not enough correc-
tion data available to compute a DGPS position.
No RTCM Input— the beacon receiver is not
properly connected, the baud rates do not match or
no signal is being provided.
RTCM Input Failed— DGPS data was being
received but has been lost.
DGPS
REFERENCE
48
The baud rate is selec-
table for all RTCM and
NMEA interface options.
Alert messages will signal
any problems with DGPS
operation.
GPS 12XL NEW Manual Rev A 2/6/98 3:18 PM Page 48
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPS 12XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPS 12XL in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info