583731
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
System Mode (SYS)
1. Press the FN key and then the SYS function smart key to reach the
System mode.
2. Press the GPS, VERS, or CNFG function smart keys to go to each page.
GPS
GPS/WAAS status, GPS Time, satellites
available with overhead view, and signal
strength of the available satellites are
shown.
VERS (Software Versions)
Unit serial number and software ver-
sions are shown. This information
should be noted before calling customer
service.
CNFG (User Configuration)
The User Configuration function allows
you to set values for your aircraft.
1. Turn the Large knob to highlight
the value.
2. Press the CRSR knob in and then
turn the Small knob to change
the value.
3. Press the Menu/Enter key to
save the value.
User Waypoints (USER)
The GNS 480 can hold up to 500 user-defined waypoints. These waypoints can
be based on either lat/lon position or range and bearing from a reference point.
In the User Waypoint function, you can create new waypoint, edit existing ones,
or search for a User waypoint.
Creating or Editing a User Waypoint
1. Press FN and then the USER key to start the User Waypoint function. You
can also create User waypoint by
using the PAN function.
2. Press the NEW or EDIT key.
3. Use the Small and Large knobs
to name or edit the waypoint
name. You can also set a range
and bearing from a reference
waypoint.
4. Turn the Large knob to go to
each field on the page and edit the values.
5. Press Menu/Enter when finished.
Searching for a User Waypoint
1. Press FN and then the USER key to start the User Waypoint function.
2. Press the SEARCH key.
3. Use the Small and Large knobs to select the waypoint name. You can
also search through a given field by pressing the CRSR knob, moving to
a field with the Large knob, and then searching within a field by turning
the Small knob.
4. Press Menu/Enter when finished.
USER WAYPOINTS (USER) / SYSTEM MODE (SYS)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 480 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info