584001

Garmin GNS 430 Manual

95
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page 5-13
P/N 190-00140-02 Page Rev L
5.2.15 STORMSCOPE CONFIG Page
(Only if 400 Series unit configured for BFG WX-500 Stormscope interface)
Select the STORMSCOPE CONFIG Page (see Figure 5-
17). This page shows the BF Goodrich WX-500
Stormscope configuration as reported by the WX-500
through RS-232 data.
Verify that the STATUS field indicates “Ok”, and that
the other displayed parameters are correct. Verify that all
the boxes in the lower portion of the page are green.
When a 400 Series unit is used with a WX-500
Stormscope, the “Synchro” or “Serial” heading formats
may be used. If another heading format is used,
lightning strike information is visible on the Weather Page, but not on the Map Page.
5.2.16 STORMSCOPE TEST Page
(Only if 400 Series unit configured for BFG WX-500 Stormscope interface)
Select the STORMSCOPE TEST Page (see Figure 5-18).
This page shows current strike activity, WX-500 status,
and the heading supplied by the WX-500. The WX-500
mode may be changed to ‘Demo’, ‘Noise monitor’, ‘Self
test’, ‘Strike test’, or ‘Weather’.
Verify that the WX-500 mode can be changed. Refer to
the WX-500 manual for specific installation test
procedures for the WX-500, using this page to view strike
data, change the WX-500 mode, view WX-500 status,
trigger count, and heading.
5.2.17 STORMSCOPE DOWNLOAD DATA Page
(Only if 400 Series unit configured for BFG WX-500 Stormscope interface)
Select the STORMSCOPE TEST Page (see Figure 5-19).
This page shows raw data downloadable from the WX-
500. Optional sets of data include WX-500 software
version, environmental conditions, configuration, and fault
data.
Verify that the configuration data is correct as intended.
To request which packet of data to display, highlight the
data group title and use the small right knob to select the
desired group.
Figure 5-17.
STORMSCOPE CONFIG Page
Figure 5-18.
STORMSCOPE TEST Page
Figure 5-19. STORMSCOPE
DOWNLOAD DATA Page
… 95 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 430 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info