584001
47
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page 4-11
P/N 190-00140-02 Page Rev L
4.6 SERIAL DATA
4.6.1 Serial Data Function
4.6.1.1 RS-232
The 400 Series unit is capable of interfacing with other aviation instruments by transmitting RS-232 Type
1 (often known as ARNAV format) and Type 2 (often known as Northstar format) data on the GPS RS 232
OUT 1 port. The data consists of the following (refer to Appendix C for a detailed data format
description):
Current latitude, longitude, and GPS altitude in feet (see Note below)
Current velocity vector (ground speed and direction of velocity vector over the ground)
Distance, bearing, desired track, and cross track error to destination waypoint
Destination waypoint identifier, sequence in route, position (latitude and longitude), and magnetic variation
Magnetic variation and navigation and warning status
NOTE
Aviation RS-232 data may be transmitted with or without the current GPS altitude in feet. Refer to section
5.2.2.
The 400 Series unit can receive pressure altitude, air data, and fuel data from certain systems on the GPS
RS 232 IN 1 port.
The 400 Series unit can communicate with a Ryan TCAD 9900B system using the GPS RS 232 OUT 2 and
GPS RS 232 IN 2 lines to display traffic information on the 400 Series unit.
If two 400 Series units are installed in an aircraft, the GPS RS 232 OUT 3 and GPS RS 232 IN 3 lines may
be cross-connected to crossfill flight plans and user-defined waypoints from one 400 Series unit to the
other.
The 400 Series unit can communicate with a BF Goodrich WX-500 Stormscope using the GPS RS 232
OUT 4 and GPS RS 232 IN 4 lines to display lightning strike information on the 400 Series unit.
4.6.1.2 ARINC 429
The data output on the GPS ARINC 429 OUT port depends on the configuration (refer to section 5.2.1).
Below is a list of the configurations and the labels output for each one:
1. ARINC 429
2. GAMA 429
3. GAMA 429 Graphics
4. GAMA 429 Graphics w/Int
Label # Parameter Name 1234
001 Distance to Go (BCD) ••••
002 Time to Go (BCD) ••••
012 Ground Speed (BCD) ••••
074G Data Record Header
075G Active Wpt From/To Data
100 Selected Course 1
100G Selected Course 1
113G Message Checksum
114 Desired Track (True) ••••
115 Waypoint Bearing (True) ••••
116 Cross Track Distance
116G Cross Track Distance
121 Horizontal Command (to Autopilot) ••••
125 Greenwich Mean Time (BCD) ••••
147G Magnetic Variation
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 430 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info