584001
43
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page 4-7
P/N 190-00140-02 Page Rev L
4.4 MAIN INDICATOR
4.4.1 Main Indicator Function
The Main Indicator displays both lateral and vertical deviation from selected course, To/From indications,
lateral and vertical flags and superflags.
The “CDI” key on the bezel of the GNS 430 takes the place of remote “NAV/GPS” switches, and is used
to toggle between display of GPS and VOR/ILS navigation display on a remote indicator. The Navigation
source is annunciated on the display above the ‘CDI’ key. The Navigation method is optionally
annunciated externally by connecting to the VLOC ANNUNCIATE output (P4001-1) and GPS
ANNUNCIATE output (P4001-2). GPS and VOR/ILS navigation may be toggled externally when the
CDI SOURCE SELECT input (P4001-73) is momentarily grounded. See section 4.5 for more information
on the external annunciators and switches.
An OBS resolver connection to the GPS is preferred, but not required. For the GNS 430, an OBS resolver
typically is connected to the MAIN OBS inputs for use with the GNS 430 VOR receiver.
4.4.2 Main Indicator Electrical Characteristics
4.4.2.1 Deviation
Pin Name Connector Pin I/O
MAIN +LEFT P4001 21 Out
MAIN +RIGHT (2.5V COMMON) P4001 22 Out
MAIN +UP P4001 27 Out
MAIN +DOWN (2.5V COMMON) P4001 28 Out
The deviation output is capable of driving up to three 1000 meter loads with ±150 mV
DC
±10% for full-
scale deflection. The drive circuit provides for more than full-scale deflection with a maximum course
deviation output voltage of ±300 mV
DC
±10%
.
4.4.2.2 TO/FROM
Pin Name Connector Pin I/O
MAIN +TO P4001 25 Out
MAIN +FROM (2.5V COMMON) P4001 26 Out
The output is capable of driving up to three 200 meter loads. When indicating TO, MAIN +TO is
+190 ±40 mV
DC
with respect to MAIN +FROM. When indicating FROM, MAIN +TO is -190 ±40 mV
DC
with respect to MAIN +FROM. When invalid information is present (Flag IN VIEW) the TO/FROM
output is 0 ±10 mV
DC.
4.4.2.3 Flag
Pin Name Connector Pin I/O
MAIN LATERAL +FLAG P4001 23 Out
MAIN LATERAL -FLAG (2.5V COMMON) P4001 24 Out
MAIN VERTICAL +FLAG P4001 29 Out
MAIN VERTICAL -FLAG (2.5V COMMON) P4001 30 Out
The Flag output is capable of driving up to three 1000 meter loads. When valid information is present
(Flag OUT OF VIEW) the Flag output is 375 ±80 mV
DC.
When invalid information is present (Flag IN
VIEW) the Flag output is 0 ±25 mV
DC.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 430 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info