584000
86
Zoom out
Zoom in
Previous page
1/124
Next page
Page 5-4 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
CHANNEL INPUTS
Selection Description
Off
No unit(s) connected to input of this channel.
Arnav/ei-fuel
Serial fuel flow information from the following units:
ARNAV FC-10, FT-10
Electronics International FP-5L
Crossfill
Serial transfer of flight plans and user waypoints between two 400 Series
units. If Crossfill is selected for a channel output, then Crossfill is
automatically selected for that channel’s input.
GDL 49
Serial data input for in-flight access to weather and messaging.
Icarus-alt
Serial altitude data from the following units:
Garmin GTX 327, Icarus Instruments 3000
Ryan TCAD
Traffic information from a Ryan TCAD 9900B Series system.
Shadin-adc
Serial air data information from the following units:
Shadin ADC 200, 200+, 2000
Shadin-alt
Serial altitude data from the following units:
Shadin 8800T, 9000T, 9200T
Shadin-fadc
Serial air data and fuel flow information from the following units:
Shadin 9628XX-X Fuel/Air Data Computer
Shadin-fuel
Serial fuel flow information from the following units:
Shadin 91204XM Digital Fuel Management System
Shadin 91053XM Digital Fuel Management System
JP Instruments EDM-700 or EDM-760 Engine Monitor
WX-500
Lightning strike information from a BF Goodrich WX-500 Stormscope.
CHANNEL OUTPUTS
Selection Description
Off
No unit(s) connected to output of this channel
Aviation
Serial position, altitude, velocity, and navigation data to the following units:
GARMIN GPSMAP 195 or GPS III Pilot
Argus 3000, 5000, or 7000 Moving Map
Electronics International FP-5L Fuel Flow Computer (non-TSO’d)
JP Instruments EDM-700 or EDM-760 Engine Monitor
Shadin 91204XM Digital Fuel Management System
Shadin 91053XM Digital Fuel Management System
Shadin 9628XX-X Fuel/Air Data Computer
Stormscope Series II (with Navaid) Moving Map
GARMIN GDL 49 Satellite data link transceiver
GARMIN GTX 327 Transponder
Avtn no alt
Serial position, velocity, and navigation data to the following units:
Horizon DDMP
Crossfill
Serial transfer of flight plans and user waypoints between two 400 Series
units
HW EGPWS
Serial communication to a Bendix/King (Honeywell) KGP 560 EGPWS.
Ryan TCAD
Serial communication with a Ryan TCAD 9900B Series system.
WX-500
Serial communication to a BF Goodrich WX-500 Stormscope.
FUEL TYPE
Selection Description
AV gas
The aircraft is using Aviation gas (5.8 lbs./gal.)
Jet A
The aircraft is using Jet A or Jet A-1 fuel (6.7 lbs./gal.)
Jet B
The aircraft is using Jet B (JP-4) fuel (6.5 lbs./gal.)
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info