584000
83
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page 5-1
P/N 190-00140-02 Page Rev L
5. POST INSTALLATION CONFIGURATION & CHECKOUT PROCEDURE
5.1 CONFIGURATION MODE OPERATIONS
With power applied to the aviation rack and the 400 Series unit turned off, press and hold the ENT key and
turn the unit on. Release the ENT key when the display activates, the unit is now in the configuration
mode. After the data base pages, the first page displayed is the MAIN ARINC 429 CONFIG page. While
in Configuration Mode, pages can be selected by ensuring the cursor is off and rotating the small right
knob.
To change data on the displayed Configuration Page, press the small right knob (CRSR) to turn on the
cursor. Turn the large right knob to change between data fields. Turn the large or small right knob to
change a field that the cursor is on. Once you have made the desired selection, press the ENT key to
accept the entry.
5.2 INSTALLATION CONFIGURATION PAGES
The Configuration Pages described in the following sections are in the order found when rotating the right
small knob clockwise starting at the MAIN ARINC 429 CONFIG page. Use the procedure described in
section 5.1 to get to this page.
NOTE
The configuration pages shown here reflect MAIN software version 2.25. All Configuration Pages shown
apply to the GNS 430, but not all apply to the GPS 400 or GNC 420. Those pages and fields that apply
only to certain 400 Series units are denoted as such.
5.2.1 MAIN ARINC 429 CONFIG Page
Select the MAIN ARINC 429 CONFIG Page (see Figure
5-1). This page configures the GPS ARINC 429 output
port, and the two GPS ARINC 429 input ports. The two
input ports can each be configured independently for the
desired function(s).
SPEED
Selection Description
Low
Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High
High-speed ARINC 429 (nominally 100 kilobits per second)
Figure 5-1.
MAIN ARINC 429 CONFIG Page
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info