584000
44
Zoom out
Zoom in
Previous page
1/124
Next page
Page 4-8 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
4.4.2.4 Superflags
Pin Name Connector Pin I/O
MAIN LATERAL SUPERFLAG P4001 17 Out
MAIN VERTICAL SUPERFLAG P4001 18 Out
The output supplies not less than 500 mA on a 28 volt system and 250 mA on a 14 volt system with the
output voltage not less than (AIRCRAFT POWER –1.5 V
DC
) when the flag is to be OUT OF VIEW. The
output voltage with respect to ground is less than 0.25 V
DC
when the flag is to be IN VIEW.
4.4.2.5 OBS
Pin Name Connector Pin I/O
MAIN OBS ROTOR C P4001 31 Out
MAIN OBS ROTOR H (GROUND) P4001 32 Out
MAIN OBS STATOR D P4001 33 In
MAIN OBS STATOR E (2.5V COMMON OBS) P4001 34 Out
MAIN OBS STATOR F P4001 35 In
MAIN OBS STATOR G (2.5V COMMON OBS) P4001 36 Out
MAIN OBS ROTOR C and H are a buffered output that is intended to drive the OBS rotors. MAIN OBS
STATOR D and MAIN OBS STATOR F are each phase and amplitude shifted version of the MAIN
ROTOR C output. Each pair is intended to read one of the two windings of the indicator’s OBS stator.
4.4.3 Main Indicator Configuration
Refer to section 5.2.10 for the main CDI/OBS configuration.
4.4.4 Main Indicator Calibration and Checkout
Refer to section 5.2.10 for the main CDI/OBS checkout.
4.4.5 Main Indicator Interconnect
Refer to Figure 4-7 on page 4-33 for the generic main indicator interconnect. Refer to Figure 4-8 on page
4-35 for the interconnect between a GNS 430 and a Bendix/King KI 209A. Refer to Figure 4-9 on page 4-
37 for the interconnect between a GPS 400 or GNC 420 and a Bendix/King KI 208A.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info