583732

Garmin GNC 250 Manual

95
Zoom out
Zoom in
Previous page
1/112
Next page
To enter an initial position reference by waypoint identifier:
1.Rotate
O
to highlight the waypoint identifier field.
2. Use
K
and
O
to spell out the identifier of the desired airport, navaid or user waypoint.
3. Press
E
to confirm the identifier. The waypoint confirmation page will appear, display-
ing the waypoint’s position.
4. Press
E
to confirm the ‘ok?’ prompt.
The position page will now appear, and you may now use most of the GNC 250
navigation features for practice and planning. You’ll also receive a ‘Do not use for nav’
message to remind you that the simulator mode should never be used for actual navi-
gation. During simulator operation, you will be able to enter a ground speed from the
CDI page, and define a course to a destination from the direct-to confirmation page.
Altitude may only be entered by using the VNAV function available from the NAV
menu 1 page (see page 22).
To enter a ground speed from the CDI page:
1.Press
N
and rotate
O
to display the CDI page.
2. Press
C
twice to activate the cursor in the GPS window.
3. Rotate
O
to highlight the ground speed field.
4. Use
K
and
O
to enter the desired speed. Press
E
to accept, and
C
to finish.
To exit the simulator mode, the GNC must be turned off by rotating the
B
knob
counter-clockwise until the unit shuts down. All waypoints and routes created in sim-
ulator mode will be retained in the GNC 250’s internal memory.
85
Enter simulated ground speed from the CDI page.
Entering an initial position reference.
Enter a simulated course from the direct-to confir-
mation page. The GNC 250 will set the course
between route legs automatically when simulating
navigation.
SECTION
C
SIMULATOR
250 real 7/14/98 9:33 AM Page 85
… 95 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info