583732

Garmin GNC 250 Manual

83
Zoom out
Zoom in
Previous page
1/112
Next page
If ‘auto’ mag var is selected, all track, course and heading information will be corrected
with the variation computed by the GPS. The ‘true’ setting will reference all information to
true north, and the ‘user’ setting will correct information to an entered value.
The GNC 250’s arrival alarm can be set to notify the pilot with a message when you
have reached a user defined distance to a final destination waypoint (the direct-to way-
point or the last waypoint in a route). Once you have reached the set distance (up to 99.9
units), an ‘Arrival at _____’ message will be displayed.
To set the arrival alarm distance:
1. Press and hold
M
and use
O
to display the ‘Mag Var/Arvl Alarm’ page.
2. Press
C
twice and use
O
to select the arrival distance field.
3. Use
K
and
O
to enter the desired distance. Press
C
to finish.
The nearest airport search settings allow you to define the runway length and
surface type used in determining the nine nearest airports displayed. A minimum runway
distance and surface may be entered to prevent airports with small runways, or runways
that are not of appropriate surface, from being displayed. The default settings are ‘0 ft/mt’
for runway length and ‘any’ for runway surface.
To set the minimum runway length and runway surface:
1. Press and hold
M
and use
O
to display the ‘Nearest apt search’ page.
2. Press
C
twice and use
K
and
O
to enter the minimum runway length upon which your
aircraft can land (up to 9999 units). Press
E
to accept the distance.
3. Rotate
K
to display the surface selection you desire. Choices include:
• any surface • hard only surface
• soft/hard surface • water only surface
4. Use
O
to select ‘ok?’ and press
E
to confirm and
C
to complete.
73
APPENDIX D
Messages &
Abbreviations
Setting the arrival alarm.
Runway length and surface type settings.
SECTION
6
UNIT SETTINGS
Arrival Alarm
Nearest Airport Search
250 real 7/14/98 9:33 AM Page 73
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info