583732

Garmin GNC 250 Manual

79
Zoom out
Zoom in
Previous page
1/112
Next page
To delete a waypoint from the active route:
1. Press
C
twice, if necessary, to activate the cursor.
2. Use
O
to highlight the waypoint you would like to delete from the active route.
3. Press
\
, followed by
E
. The next route waypoint (if available) will move up to take
the position of the deleted waypoint.
The active route page also allows you to select your next destination waypoint
manually from the active route waypoint list and resume the remainder of the route in
sequence. This procedure, referred to as an ‘on-route’ direct-to, allows the pilot to
fly the active route in a different sequence without editing the active route itself.
To perform an on-route direct-to from the active route page:
1. Press
C
twice and rotate
O
to highlight the desired waypoint.
2. Press
D
, followed by
E
to confirm the ‘ok?’ prompt on the waypoint
confirmation page.
The GNC 250 will now provide guidance to the selected waypoint and resume
navigating the remainder of the route in sequence once you arrive at the next destina-
tion waypoint. The waypoint sequencing field, located at the bottom left of the
direct-to confirmation page, allows you to select manual or automatic waypoint
sequencing of route waypoints. Setting the selector to the ‘hold’ setting holds your
current ‘active-to’ waypoint as your navigation reference and prevents the GPS from
sequencing to the next waypoint in the route. The waypoint sequencing selector may
be used in conjunction with the course select feature (see page 60) to manually select
the course to the ‘hold’ waypoint.
69
APPENDIX B
NavData &
User Data Cards
SECTION
5
ROUTES
On-Route Direct-To
Waypoint Sequencing
You can hold on a destination waypoint by setting
the waypoint sequencing field to the ‘hold’ posi-
tion. A user-defined course may also be entered in
the course select field.
Whenever waypoint sequencing is set to ‘hold’, the
desired course is displayed at the bottom left of
the CDI page. See page 70 for more details.
250 real 7/14/98 9:33 AM Page 69
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info