583732

Garmin GNC 250 Manual

62
Zoom out
Zoom in
Previous page
1/112
Next page
Because the GNC 250 relies on a NavData card for most waypoint information,
there may be instances when waypoint information is not available for use. Locked
waypoints exist when a waypoint contained in a route or used as a proximity way-
point is not contained on the NavData card, or no card is inserted in the unit. If this
condition exists, you’ll be alerted with a ‘Proximity wpt locked’, ‘Route wpt locked’ or
‘Wpt comment locked’ message when the unit is powered up. The identifier of a
locked waypoint will be replaced with a ‘lockd’ message, which indicates you cannot
obtain waypoint information or navigate to the waypoint. The identifier of a locked
waypoint may be displayed by highlighting ‘lockd’ and pressing ENT. Locked way-
points may be deleted from routes, the user waypoint list or the proximity waypoints
list by following the instructions in the appropriate section.
The waypoint scanning feature provides a fast way to scan through airports,
VORs, NDBs and intersections in the database by identifier, facility name or city.
Waypoint scanning may be used from any blank identifier field in the GPS window.
To enter a waypoint by scanning the identifier, facility name or city:
1. With the cursor over a blank identifier field, press
W
. If the identifier field is not blank,
highlight the field with the flashing cursor and press
\
before pressing
W
.
2. Use
O
to highlight the waypoint category you wish to scan.
3. Press
E
to activate the scanning mode.
4. Rotate
O
to place the flashing cursor over the field you want to scan (identifier, facility
or city name).
5. Use
K
and
O
to enter the letters of the identifier, city or facility name. The GNC 250
will scan the database and display the first waypoint that matches your entry.
6. Press
E
to accept the waypoint, and
E
again to confirm the waypoint for the
function being used.
52
REFERENCE
User Comments &
Parallel Track
Alarms possible for locked waypoints.
To blank a waypoint field, highlight the field and
press the CLR key.
SECTION
3
WPT KEY
Locked Waypoints
Waypoint Scanning
250 real 7/14/98 9:32 AM Page 52
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info