Manual Garmin Forerunner 945 (page 37 of 52) (English)

691082

Zoom out

Zoom in

1/52

Track Log: Shows or hides the track log, or the path you have

traveled, as a colored line on the map.

Track Color: Changes the track log color.

Detail: Sets the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Marine: Sets the map to display data in marine mode.

Draw Segments: Shows or hides segments, as a colored line

on the map.

Draw Contours: Shows or hides contour lines on the map.

Routing Settings

You can change the routing settings to customize the way the

device calculates routes for each activity.

Hold , select Settings > Activities & Apps, select an activity,

select the activity settings, and select Routing.

Activity: Sets an activity for routing. The device calculates

routes optimized for the type of activity you are doing.

Popularity Routing: Calculates routes based on the most

popular runs and rides from Garmin Connect.

Courses: Sets how you navigate courses using the device. Use

the Follow Course option to navigate a course exactly as it

appears, without recalculating. Use the Use Map option to

navigate a course using routable maps, and recalculate the

route if you stray from the course.

Calculation Method: Sets the calculation method to minimize

the time, distance, or ascent in routes.

Avoidances: Sets the road or transportation types to avoid in

routes.

Type: Sets the behavior of the pointer that appears during direct

routing.

Auto Lap

Marking Laps by Distance

You can use Auto Lap to mark a lap at a specific distance

automatically. This feature is helpful for comparing your

performance over different parts of an activity (for example,

every 1 mile or 5 kilometers).

Hold .

Select Settings > Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Lap.

Select an option:

• Select Auto Lap to turn Auto Lap on or off.

• Select Auto Distance to adjust the distance between

laps.

Each time you complete a lap, a message appears that displays

the time for that lap. The device also beeps or vibrates if audible

tones are turned on (System Settings, page 33).

If necessary, you can customize the data pages to display

additional lap data (Customizing the Data Screens, page 30).

Customizing the Lap Alert Message

You can customize one or two data fields that appear in the lap

alert message.

Hold .

Select Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Lap > Lap Alert.

Select a data field to change it.

Select Preview (optional).

Enabling Auto Pause

You can use the Auto Pause feature to pause the timer

automatically when you stop moving. This feature is helpful if

your activity includes stop lights or other places where you must

stop.

NOTE: History is not recorded while the timer is stopped or

paused.

Hold .

Select Settings > Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Pause.

Select an option:

• To pause the timer automatically when you stop moving,

select When Stopped.

• To pause the timer automatically when your pace or

speed drops below a specified level, select Custom.

Enabling Auto Climb

You can use the auto climb feature to detect elevation changes

automatically. You can use it during activities such as climbing,

hiking, running, or biking.

Hold .

Select Settings > Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Climb > Status.

Select Always or When Not Navigating.

Select an option:

• Select Run Screen to identify which data screen appears

while running.

• Select Climb Screen to identify which data screen

appears while climbing.

• Select Invert Colors to reverse the display colors when

changing modes.

• Select Vertical Speed to set the rate of ascent over time.

• Select Mode Switch to set how quickly the device

changes modes.

NOTE: The Current Screen option allows you to

automatically switch to the last screen you were viewing

before the auto climb transition occurred.

3D Speed and Distance

You can set 3D speed and distance to calculate your speed or

distance using both your elevation change and your horizontal

movement over ground. You can use it during activities such as

skiing, climbing, navigating, hiking, running, or biking.

Using Auto Scroll

You can use the auto scroll feature to cycle through all of the

activity data screens automatically while the timer is running.

Hold .

Select Settings > Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Scroll.

Select a display speed.

Customizing Your Device 31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Forerunner 945 in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Forerunner 945

Garmin Forerunner 945 User Manual - German - 60 pages

Garmin Forerunner 945 User Manual - Dutch - 56 pages

Garmin Forerunner 945 User Manual - French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Forerunner 945 Manual

Product: