674211
12
Zoom out
Zoom in
Previous page
1/22
Next page
Enabling Traffic
You can enable or disable traffic data. When traffic data is
disabled, the device does not receive traffic data, but it still
avoids potentially congested areas in routes using the
trafficTrends feature, if enabled (trafficTrends).
1
Select Settings > Traffic.
2
Select the Traffic check box.
Voice Command
NOTE: Voice command is not available for all languages and
regions, and may not be available on all models.
NOTE: Voice Activated Navigation may not achieve desired
performance when in a noisy environment.
Voice command allows you to use your device by saying words
and commands. The voice command menu provides voice
prompts and a list of available commands.
Setting the Wakeup Phrase
The wakeup phrase is a word or phrase you can say to activate
voice command. The default wakeup phrase is Voice
Command.
TIP: You can reduce the chance of accidental voice command
activation by using a strong wakeup phrase.
1
Select > Voice Command > Customize Phrase.
2
Enter a new wakeup phrase.
The device indicates the strength of the wakeup phrase as
you enter the phrase.
3
Select Done.
Activating Voice Command
Say your wakeup phrase.
The voice command menu appears.
Voice Command Tips
Speak in a normal voice directed at the device.
Reduce background noise, such as voices, or the radio, to
increase the accuracy of the voice recognition.
Speak commands as they appear on the screen.
Respond to voice prompts from the device as needed.
Increase the length of your wakeup phrase to reduce the
chance of accidental voice command activation.
Listen for two tones to confirm when the device enters and
exits voice command.
Starting a Route Using Voice Command
You can say the names of popular, well-known locations.
1
Say your wakeup phrase (Setting the Wakeup Phrase).
2
Say Find Place.
3
Listen for the voice prompt, and speak the name of the
location.
4
Say the line number.
5
Say Navigate.
Muting Instructions
You can disable the voice prompts for voice command without
muting the device.
1
Select > Voice Command > .
2
Select Mute Instructions > Enabled.
Disabling Voice Command
You can disable voice command, which prevents you from
accidentally activating voice command while speaking.
1
Select > Voice Command > .
2
Select Voice Command > Disabled.
Hands-Free Phone Calls
About Hands-Free Calling
NOTE: While most phones and headsets are supported and
can be used, it cannot be guaranteed that a particular phone or
headset can be used. All features may not be available for your
phone.
Using Bluetooth wireless technology, your device can connect
to your mobile phone and wireless headset or helmet to become
a hands-free device. To determine whether your device with
Bluetooth technology is compatible with your device, go to
www.garmin.com/bluetooth.
Pairing Your Phone
Before you can use hands-free calling, you must pair your
device with a compatible mobile phone.
1
Place your phone and your Bluetooth device within 33 ft. (10
m) of each other.
2
On your device, enable Bluetooth wireless technology.
3
Select an option:
Select Settings > Bluetooth > Add Bluetooth Device.
If you have already paired a different phone, select
Settings > Bluetooth > Device > .
4
On your phone, enable Bluetooth wireless technology.
5
On your device, select OK.
A list of nearby Bluetooth devices appears.
6
Select your phone from the list, and select OK.
7
If necessary, on your phone, confirm that the device is
allowed to connect.
8
If necessary, enter the device Bluetooth PIN into your phone.
Enabling Bluetooth Wireless Technology
1
Select Settings > Bluetooth.
2
Select Bluetooth.
Tips After Pairing the Devices
After the initial pairing, the two devices can connect
automatically each time you turn them on.
When your phone is connected to your device, you are ready
to receive voice calls.
When you turn on the device, it tries to connect to the last
phone to which it was connected.
You might need to set your phone to connect to the device
automatically when the device is turned on.
Disconnecting a Bluetooth Device
You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
still connect to your Garmin fleet device automatically in the
future.
1
Select Settings > Bluetooth.
2
Select the device you want to disconnect.
3
Clear the device check box.
Deleting a Paired Phone
You can delete a paired phone to prevent it from automatically
connecting to your device in the future.
8 Voice Command
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fleet 660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fleet 660 in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fleet 660

Garmin Fleet 660 User Manual - German - 24 pages

Garmin Fleet 660 User Manual - Dutch - 22 pages

Garmin Fleet 660 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info