38896
14
Zoom out
Zoom in
Previous page
1/40
Next page
Fishnder 400C Owner’s Manual
InstallIng the FIshFInder 400c
6. Markthelocation.Usinga1/8"bit,drillapilothole
approximately3/8"(10mm)deep.
7. Attachthecableclampusinga4x12mmscrew.Coatthe
screwwithmarinesealantbeforeinstallation.Repeatsteps5
and6usingtheothercableclamp.
8. Routethetransducercable,asneeded,totheshnder.DO
NOTCUTTHECABLE.Avoidroutingthecablewithelectrical
wiresorothersourcesofelectricalinterference.
OK
Level
Drill pilot holes here.
Vertical
Bottom of the transom
Align with the transom
bottom. The transducer
should extend /"
below berglass hulls
or /" below aluminum
hulls.
Keep it parallel with the water line.
Shoot-Thru-Hull Installation
To avoid drilling a hole to mount a thru-hull transducer, a
transducer can be secured with epoxy inside a boat (shoot-thru-
hull installation). This type of installation can provide better
noise reduction and allow you to use a higher Gain setting. For
a transducer to be mounted inside the hull (shoot-thru, not thru-
hull), the boat must be berglass, with no core. Contact your boat
manufacturer if you are unsure. Professional installation might be
necessary.
Some transducers are specically designed to be mounted inside a
berglass hull. The standard plastic transom mount transducer can
also be mounted using this method. If using a temperature sensing
transducer, the temperature shown reects the hull temperature.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fishfinder 400C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fishfinder 400C in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fishfinder 400C

Garmin Fishfinder 400C Quick start guide - German - 2 pages

Garmin Fishfinder 400C User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info