522218
23
Zoom out
Zoom in
Previous page
1/40
Next page
15
Pausing the Sonar Page
You may pause the Sonar Page to stop it from scrolling. The paused screen allows you to take a better
look at sonar returns. When in this mode, the word “Paused” is displayed at the bottom of the screen and
a Pointer cursor is activated. You may move the Pointer around on the paused sonar graph in order to
reference sonar items and mark waypoints for that location (if attached to a Garmin GPS or compatible
NMEA navigation device. See pg. 5.) A data fi eld is displayed at the top of the graph with the Pointer’s
depth, surface temperature for that position, and GPS coordinates (if available). This makes it easier to fi nd
and use objects such as stumps, rocks, or brush piles for future fi shing locations. The depth continues to
update while the display is paused, but the unit will not show any new sonar data until the Sonar display is
unpaused (resumed). You may see a discontinuity from where the sonar information stops to where it starts
again.
To pause and unpause the Sonar display:
1. From the Sonar Page, press ADJ/MENU.
2. Using the ARROW keys, highlight the ‘Pause’ option and press ENTER. The Sonar display is paused. The
Pointer cursor is activated, and data fi elds for the Pointer are displayed at the top of the screen.
3. To unpause the Sonar display, press ADJ/MENU, highlight the ‘Resume’ option and press ENTER.
To mark an underwater waypoint:
1. With the Sonar display paused, use the ARROW keys to move the cursor onto the target (underwater
drop off, stump, etc.) you want to mark. A data fi eld is displayed with the cursor’s depth, surface tem-
perature for that position and GPS coordinates.
3. Press ENTER. The New Waypoint window is displayed with a default three-digit name and pointer’s
coordinates automatically fi lled in.
4. To change the name, highlight the name fi eld and press ENTER. Make your changes using the ARROW
keys and press ENTER when done.
5. When fi nished, move the fi eld highlight back to the ‘OK’ prompt and press ENTER. The unit sends a
NMEA WPL sentence to an attached GPS unit or NMEA navigational device (see pgs. 5-6).
Pausing the Sonar Page
Unit Operation
You may send an underwater
waypoint to a GPS unit.
As you move the Pointer, the Depth,
Temp and Position (if available) is
displayed at the top of the screen.
250C Manual.indd 15 1/27/2004, 3:55:08 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fishfinder 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fishfinder 250 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info