522218
9
Zoom out
Zoom in
Previous page
1/40
Next page
1
Installation
Installing the Fishfi nder 250/250C
The Fishfi nder 250/250C must be properly installed according to the following instructions to get the
best possible performance. To complete the installation, you’ll need the appropriate fasteners and tools.
Verify that all cables can reach the unit mounting location and also take time to read through these instruc-
tions prior to installation. Be sure to always wear safety goggles and a dust mask when drilling, cutting or
sanding. When in doubt, seek professional assistance.
Selecting a Proper Location
Choose a location that provides optimal viewing while operating the vessel and allows easy access to
the unit’s keypad. Select a mounting surface strong enough to support the weight of the unit and protect
it from excessive vibration and shock. DO NOT mount the bracket in a location where the unit is exposed
to extreme temperature conditions. When installing the mounting bracket, be sure to allow room for the
connection/routing of the power and transducer cables.
Swivel Mounting the Fishfi nder 250/250C Unit
The Fishfi nder 250/250C’s compact, waterproof case is suitable for mounting in exposed locations or
at the nav station. The unit comes with a swivel-mount bracket that can be used for console or overhead
mounting. When choosing a location for the display unit, make sure you consider the following conditions:
There should be at least a 3” (8 cm) clearance behind the case to allow connection of the transducer
and power/data cables.
The mounting surface should be sturdy enough to support the unit and protect it from excessive
vibration and shock.
NOTE
:
The temperature range for the Fishfi nder 250/250C is 5°F to 130°F (-15°C to 55°C).
Extended exposure to temperatures exceeding this range (in storage or operating condi-
tions) may cause failure of the LCD screen. This type of failure and related consequences are
NOT covered by the manufacturer’s limited warranty.
,
Unit Installation
250C Manual.indd 1 1/27/2004, 3:54:51 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fishfinder 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fishfinder 250 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info