657425
31
Zoom out
Zoom in
Previous page
1/42
Next page
4
Select Settings > Sensors & Accessories > Add New.
5
Select an option:
Select Search All.
Select your sensor type.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Using an Optional Bike Speed or Cadence
Sensor
You can use a compatible bike speed or cadence sensor to
send data to your device.
Pair the sensor with your device (Pairing ANT+ Sensors,
page 24).
Update your fitness user profile information (Setting Up Your
User Profile, page 10).
Set your wheel size (Wheel Size and Circumference,
page 31).
Go for a ride (Starting an Activity, page 2).
Training with Power Meters
Go to www.garmin.com/intosports for a list of ANT+ sensors
that are compatible with your device (such as Vector).
For more information, see the owner's manual for your power
meter.
Adjust your power zones to match your goals and abilities
(Setting Your Power Zones, page 11).
Use range alerts to be notified when you reach a specified
power zone (Setting an Alert, page 21).
Customize the power data fields (Customizing the Data
Screens, page 20).
Using Electronic Shifters
Before you can use compatible electronic shifters, such as
Shimano
®
Di2
shifters, you must pair them with your device
(Pairing ANT+ Sensors, page 24). You can customize the
optional data fields (Customizing the Data Screens, page 20).
The fēnix Chronos device displays current adjustment values
when the sensor is in adjustment mode.
Situational Awareness
Your fēnix Chronos device can be used with the Varia Vision
device, Varia
smart bike lights, and rearview radar to improve
situational awareness. See the owner's manual for your Varia
device for more information.
NOTE: You may need to update the fēnix Chronos software
before pairing Varia devices (Updating the Software Using
Garmin Connect Mobile, page 18).
Foot Pod
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod (Pairing ANT+
Sensors, page 24).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1
Stand outside for 5 minutes with a clear view of the sky.
2
Start a running activity.
3
Run on a track without stopping for 10 minutes.
4
Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod sensor (Pairing ANT+ Sensors, page 24).
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1
Hold MENU.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Cal. Factor > Set Value.
5
Adjust the calibration factor:
Increase the calibration factor if your distance is too low.
Decrease the calibration factor if your distance is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and distance, you
must pair your device with the foot pod sensor (Pairing ANT+
Sensors, page 24).
You can set your device to calculate speed and distance using
your foot pod data instead of GPS data.
1
Hold MENU.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Speed or Distance.
5
Select an option:
Select Indoor when you are training with GPS turned off,
usually indoors.
Select Always to use your foot pod data regardless of the
GPS setting.
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Device Information
fēnix Chronos Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life Up to 7 days
Water rating 10 ATM*
Operating temperature range From -20º to 50ºC (from -4º to 122ºF)
Charging temperature range From 0º to 45ºC (from 32º to 113ºF)
Radio frequency 2.4 GHz
Radio protocols ANT+ wireless technology
Bluetooth Smart device
*The device withstands pressure equivalent to a depth of 100 m.
For more information, go to www.garmin.com/waterrating.
Device Information 25
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fenix Chronos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix Chronos in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix Chronos

Garmin Fenix Chronos User Manual - German - 46 pages

Garmin Fenix Chronos User Manual - Dutch - 44 pages

Garmin Fenix Chronos User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info