Manual Garmin Fenix 6 (page 10 of 56) (English)

691072

Zoom out

Zoom in

1/56

Recording a Strength Training Activity

You can record sets during a strength training activity. A set is

multiple repetitions (reps) of a single move.

From the watch face, press .

Select Strength.

The first time you record a strength training activity, you must

select which wrist your watch is on.

Press to start the set timer.

Start your first set.

The device counts your reps. Your rep count appears when

you complete at least four reps.

TIP: The device can only count reps of a single move for

each set. When you want to change moves, you should finish

the set and start a new one.

Press LAP to finish the set.

The watch displays the total reps for the set. After several

seconds, the rest timer appears.

If necessary, press DOWN, and edit the number of reps.

TIP: You can also add the weight used for the set.

When you are done resting, press LAP to start your next set.

Repeat for each strength training set until your activity is

complete.

After your last set, press to stop the set timer.

Select Save.

Outdoor Activities

The fēnix device comes preloaded with outdoor activities, such

as running and cycling. GPS is turned on for outdoor activities.

You can add new activities based on default activities, such as

walking or rowing. You can also add custom activities to your

device (Creating a Custom Activity, page 3).

Viewing Your Ski Runs

Your device records the details of each downhill skiing or

snowboarding run using the auto run feature. This feature is

turned on by default for downhill skiing and snowboarding. It

automatically records new ski runs based on your movement.

The timer pauses when you stop moving downhill and when you

are on a chairlift. The timer remains paused during the chairlift

ride. You can start moving downhill to restart the timer. You can

view run details from the paused screen or while the timer is

running.

Start a skiing or snowboarding activity.

Hold MENU.

Select View Runs.

Press UP and DOWN to view details of your last run, your

current run, and your total runs.

The run screens include time, distance traveled, maximum

speed, average speed, and total descent.

Using the Metronome

The metronome feature plays tones at a steady rhythm to help

you improve your performance by training at a faster, slower, or

more consistent cadence.

NOTE: This feature is not available for all activities.

From the watch face, press .

Select an activity.

Hold MENU.

Select the activity settings.

Select Metronome > Status > On.

Select an option:

• Select Beats / Minute to enter a value based on the

cadence you want to maintain.

• Select Alert Frequency to customize the frequency of the

beats.

• Select Sounds to customize the metronome tone and

vibration.

If necessary, select Preview to listen to the metronome

feature before you run.

Go for a run (Starting an Activity, page 2).

The metronome starts automatically.

During your run, press UP or DOWN to view the metronome

screen.

If necessary, hold MENU to change the metronome settings.

Playing Audio Prompts During an Activity

You can enable your fēnix device to play motivational status

announcements during a run or other activity. Audio prompts

play on your connected headphones using Bluetooth

technology, if available. Otherwise, audio prompts play on your

smartphone paired through the Garmin Connect app. During an

audio prompt, the device or smartphone mutes the primary

audio to play the announcement.

NOTE: This feature is not available for all activities.

Hold MENU.

Select Audio Prompts.

Select an option:

• To hear a prompt for each lap, select Lap Alert.

NOTE: The Lap Alert audio prompt is enabled by default.

• To customize prompts with your pace and speed

information, select Pace/Speed Alert.

• To customize prompts with your heart rate information,

select Heart Rate Alert.

• To customize prompts with power data, select Power

Alert.

• To hear prompts when you start and stop the timer,

including the Auto Pause

feature, select Timer Events.

• To hear activity alerts play as an audio prompt, select

Activity Alerts.

• To change the language or the dialect of the voice

prompts, select Dialect.

Jumpmaster

WARNING

The jumpmaster feature is for use by experienced skydivers

only. The jumpmaster feature should not be used as a primary

skydiving altimeter. Failure to input the appropriate jump related

information can lead to serious personal injury or death.

The jumpmaster feature follows military guidelines for

calculating the high altitude release point (HARP). The device

detects automatically when you have jumped to begin navigating

toward the desired impact point (DIP) using the barometer and

electronic compass.

Multisport

Triathletes, duathletes, and other multisport competitors can

take advantage of the multisport activities, such as Triathlon or

Swimrun. During a multisport activity, you can transition

between activities and continue to view your total time and

distance. For example, you can switch from biking to running

and view your total time and distance for biking and running

throughout the multisport activity.

You can customize a multisport activity, or you can use the

default triathlon activity set up for a standard triathlon.

4 Activities and Apps

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix 6 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix 6

Garmin Fenix 6 User Manual - German - 62 pages

Garmin Fenix 6 User Manual - Dutch - 60 pages

Garmin Fenix 6 User Manual - French - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Fenix 6 Manual

Product: