Manual Garmin Fenix 6 Pro (page 36 of 56) (English)

691075

Zoom out

Zoom in

1/56

Alert Name Alert Type Description

Custom Event,

recurring

You can select an existing message or

create a custom message and select an

alert type.

Distance Recurring You can set a distance interval.

Elevation Range You can set minimum and maximum

elevation values.

Heart Rate Range You can set minimum and maximum heart

rate values or select zone changes. See

About Heart Rate Zones, page 20 and

Heart Rate Zone Calculations, page 21.

Pace Range You can set minimum and maximum pace

values.

Power Range You can set the high or low power level.

Proximity Event You can set a radius from a saved

location.

Run/Walk Recurring You can set timed walking breaks at

regular intervals.

Speed Range You can set minimum and maximum

speed values.

Stroke Rate Range You can set high or low strokes per

minute.

Time Event,

recurring

You can set a time interval.

Setting an Alert

Hold MENU.

Select Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Alerts.

Select an option:

• Select Add New to add a new alert for the activity.

• Select the alert name to edit an existing alert.

If necessary, select the type of alert.

Select a zone, enter the minimum and maximum values, or

enter a custom value for the alert.

If necessary, turn on the alert.

For event and recurring alerts, a message appears each time

you reach the alert value. For range alerts, a message appears

each time you exceed or drop below the specified range

(minimum and maximum values).

Activity Map Settings

You can customize the appearance of the map data screen for

each activity.

Hold MENU, select Activities & Apps, select an activity, select

the activity settings, and select Map.

Configure Maps: Shows or hides data from installed map

products.

Map Theme: Sets the map to display data optimized for your

activity type. The System option uses the preferences from

the system map settings (Map Themes, page 35).

Use Sys. Settings: Enables the device to use the preferences

from the system map settings.

Orientation: Sets the orientation of the map. The North Up

option shows north at the top of the screen. The Track Up

option shows your current direction of travel at the top of the

screen.

User Locations: Shows or hides saved locations on the map.

Auto Zoom: Automatically selects the zoom level for optimal

use of your map. When disabled, you must zoom in or out

manually.

Lock on Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Track Log: Shows or hides the track log, or the path you have

traveled, as a colored line on the map.

Track Color: Changes the track log color.

Detail: Sets the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Marine: Sets the map to display data in marine mode (Marine

Map Settings, page 35).

Draw Segments: Shows or hides segments, as a colored line

on the map.

Draw Contours: Shows or hides contour lines on the map.

Routing Settings

You can change the routing settings to customize the way the

device calculates routes for each activity.

Hold MENU, select Activities & Apps, select an activity, select

the activity settings, and select Routing.

Activity: Sets an activity for routing. The device calculates

routes optimized for the type of activity you are doing.

Popularity Routing: Calculates routes based on the most

popular runs and rides from Garmin Connect.

Courses: Sets how you navigate courses using the device. Use

the Follow Course option to navigate a course exactly as it

appears, without recalculating. Use the Use Map option to

navigate a course using routable maps, and recalculate the

route if you stray from the course.

Calculation Method: Sets the calculation method to minimize

the time, distance, or ascent in routes.

Avoidances: Sets the road or transportation types to avoid in

routes.

Type: Sets the behavior of the pointer that appears during direct

routing.

Auto Lap

Marking Laps by Distance

You can use Auto Lap to mark a lap at a specific distance

automatically. This feature is helpful for comparing your

performance over different parts of an activity (for example,

every 1 mile or 5 kilometers).

Hold MENU.

Select Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Lap.

Select an option:

• Select Auto Lap to turn Auto Lap on or off.

• Select Auto Distance to adjust the distance between

laps.

Each time you complete a lap, a message appears that displays

the time for that lap. The device also beeps or vibrates if audible

tones are turned on (System Settings, page 36).

Customizing the Lap Alert Message

You can customize one or two data fields that appear in the lap

alert message.

Hold MENU.

Select Activities & Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select the activity settings.

Select Auto Lap > Lap Alert.

30 Customizing Your Device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix 6 Pro in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix 6 Pro

Garmin Fenix 6 Pro User Manual - German - 62 pages

Garmin Fenix 6 Pro User Manual - Dutch - 60 pages

Garmin Fenix 6 Pro User Manual - French - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Fenix 6 Pro Manual

Product: