Manual Garmin Fenix 3 Sapphire HR (page 23 of 34) (English)

628979

Zoom out

Zoom in

1/34

Hold

UP.

Select Settings > Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select

Auto Scroll.

Select a display speed.

UltraTrac

The

UltraTrac feature is a GPS setting that records track points

and sensor data less frequently. Enabling the UltraTrac feature

increases battery life but decreases the quality of recorded

activities. You should use the UltraTrac feature for activities that

demand longer battery life and for which frequent sensor data

updates are less important.

Power Save Timeout Settings

The timeout settings affect how long your device stays in

training mode, for example, when you are waiting for a race to

start. Hold UP, select Settings >

Apps

, and select an activity.

Select Power Save to adjust the timeout settings for the activity.

Normal: Sets the device to enter low-power watch mode after 5

minutes of inactivity.

Extended: Sets the device to enter low-power watch mode after

25 minutes of inactivity. The extended mode can result in

shorter battery life between charges.

Turning On and Off the Lap Key

You can turn on the Lap Key

setting to record a lap or a rest

during an activity using LAP. You can turn off the Lap Key

setting to avoid recording laps due to accidental key presses

during an activity.

Hold

UP.

Select Settings > Apps.

Select an activity.

Select

Lap Key.

The lap key status changes to On or Off based on the current

setting.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ

store (

Connect IQ

Features, page 16)

You can customize the watch face information and appearance,

or activate an installed Connect IQ watch face.

Hold UP

Select Settings

> Watch Face > Type

Select an option:

• To activate the pre-loaded digital watch face, select

Digital.

• To activate the pre-loaded analog watch face, select

Analog.

• To activate an installed Connect IQ watch face, select the

name of the installed watch face.

If using a pre-loaded watch face, select an option:

• To change the background color, select Background

Color

• To add or change an accent color for the digital watch

face, select

Accent Color.

• To change the style of the digits for the digital watch face,

select

Layout.

• To change the style of the hands for the analog watch

face, select

Hands.

• To change the style of the numbers for the analog watch

face, select

Background.

• To change the data that appears on the watch face, select

Additional Data.

Select

UP or DOWN to preview the watch face options.

Select

START to save the selection.

Sensors Settings

Compass Settings

Hold UP

, and select

Settings

> Sensors > Compass

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the Compass, page 19)

Display: Sets the directional heading on the compass to letters,

degrees, or milli-radians.

North Ref.: Sets the north reference of the compass (Setting the

North Reference, page 19)

Mode: Sets the compass to use electronic-sensor data only

(

On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold UP

Select Settings

> Sensors > Compass > Calibrate > Start

Follow the on-screen instructions.

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold UP

Select Settings

> Sensors > Compass > North Ref.

Select an option:

• To set geographic north as the heading reference, select

True

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

• To set the magnetic variation value manually, select User,

enter the magnetic variance, and select Done

Altimeter Settings

Hold

UP, and select

Settings

> Sensors > Altimeter

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Calibrate: Allows you to manually calibrate the altimeter sensor.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

Hold UP

Select Settings > Sensors > Altimeter.

Customizing Your Device 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fenix 3 Sapphire HR in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Fenix 3 Sapphire HR

Garmin Fenix 3 Sapphire HR User Manual - German - 38 pages

Garmin Fenix 3 Sapphire HR User Manual - Dutch - 38 pages

Garmin Fenix 3 Sapphire HR User Manual - French - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Fenix 3 Sapphire HR Manual

Product: