Manual Garmin eTrex Touch 35 (page 14 of 20) (English)

629025

Zoom out

Zoom in

1/20

North Reference: Sets the north reference used on the

compass.

Go To Line (Pointer): Allows you to use the bearing pointer that

points in the direction of your destination, or use the course

pointer that shows your relationship to the course line leading

to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Allows you to calibrate the compass if you

experience irregular compass behavior, for example, after

moving long distances or after extreme temperature changes.

See Calibrating the Compass, page 4.

Altimeter Settings

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on. The device continues to

automatically calibrate the altimeter as long as the device has

GPS signals acquired.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always can be useful when you are watching for

pressure fronts.

Plot Type: Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Allows you to calibrate the barometric

altimeter if you know the correct elevation or the correct

barometric pressure. See Calibrating the Barometric

Altimeter, page 5.

Position Format Settings

NOTE: You should not change the position format or the map

datum coordinate system unless you are using a map or chart

that specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format in which a location

reading appears.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, pressure, and vertical speed.

Select Setup > Units.

Select a measurement type.

Select a unit of measure.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Geocaching Settings

Select Setup > Geocaching.

Appearance: Allows you to set the display style for geocache

data, and display the geocache list by names or codes.

chirp Searching: Allows the device to search for a geocache

containing a chirp accessory (Enabling chirp Searching,

page 6).

Program chirp: Programs the chirp accessory. See the chirp

Owner's Manual at www.garmin.com.

Filter Setup: Allows you to create and save custom filters for

geocaches (Creating and Saving a Geocache Filter, page 5).

Found Geocaches: Allows you to edit the number of geocaches

found. This number automatically increases when you log a

find (Logging the Attempt, page 6).

ANT+ Sensor Settings

For more information about optional fitness accessories, see

Optional Fitness Accessories, page 7.

Fitness Settings

Select Setup > Fitness.

Auto Lap: Sets the device to automatically mark the lap at a

specific distance.

User: Sets the user profile information (Setting Your Fitness

User Profile, page 10).

HR Zones: Sets the five heart rate zones for fitness activities.

Activity Type: Sets the fitness activity to running, cycling, or

other. This allows your running activity to appear as a running

activity when you transfer it to Garmin Connect.

Setting Your Fitness User Profile

The device uses information that you enter about yourself to

calculate accurate data. You can modify the following user

profile information: gender, age, weight, height, and lifetime

athlete (About Lifetime Athletes, page 10).

Select Setup > Fitness > User.

Modify the settings.

About Lifetime Athletes

A lifetime athlete is an individual who has trained intensely for

many years (with the exception of minor injuries) and has a

resting heart rate of 60 beats per minute (bpm) or less.

Marking Laps by Distance

You can use Auto Lap

to automatically mark the lap at a

specific distance. This feature is helpful for comparing your

performance over different parts of an activity.

Select Setup > Fitness > Auto Lap.

Enter a value, and select .

Marine Settings

Select Setup > Marine.

Marine Chart Mode: Sets the type of chart the device uses

when displaying marine data. Nautical displays various map

features in different colors so the marine POIs are more

readable and so the map reflects the drawing scheme of

paper charts. Fishing (requires marine maps) displays a

detailed view of bottom contours and depth soundings and

simplifies map presentation for optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting Up Marine Alarms

Select Setup > Marine > Marine Alarm Setup.

10 Customizing the Device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin eTrex Touch 35 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin eTrex Touch 35

Garmin eTrex Touch 35 User Manual - German - 22 pages

Garmin eTrex Touch 35 User Manual - Dutch - 22 pages

Garmin eTrex Touch 35 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin eTrex Touch 35 Manual

Product: