629025

Garmin eTrex Touch 35 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
chirp
™
A chirp is a small Garmin accessory that is programmed and left
in a geocache. You can use your device to find a chirp in a
geocache. For more information about the chirp, see the chirp
Owner's Manual at www.garmin.com.
Enabling chirp Searching
1
Select Setup > Geocaching.
2
Select chirp Searching > On.
Finding a Geocache with a chirp
1
Select Geocaching > Find a Geocache.
2
Select a geocache.
3
Select Go.
4
Navigate using the map (Navigating with the Map, page 4) or
compass (Navigating with the Compass, page 4).
When you are within approximately 32.9 ft (10 m) of the
geocache that contains a chirp, details about the chirp
appear.
5
If necessary, select Geocaching > Show chirp Details.
6
If available, select Go to navigate to the next stage of the
geocache.
Logging the Attempt
Before you can log an attempt to find a geocache, you must
start navigating to the geocache (Navigating to a Geocache,
page 5).
After attempting to find a geocache, you can log your results.
1
Select Geocaching > Log Attempt.
2
Select Found, Did Not Find, or Needs Repair.
3
Select an option:
• To begin navigation to the next geocache nearest you,
select Find Next Closest.
• To stop logging, select Done.
• To enter a comment about looking for the cache or about
the cache itself, select Edit Comment, enter a comment,
and select .
Applications
Sending and Receiving Data Wirelessly
Before you can share data wirelessly, you must be within 10 feet
(3 m) of a compatible device.
Your device can send and receive data when paired with
another compatible device or smartphone using ANT+
®
wireless
technology. You can share waypoints, geocaches, routes, and
tracks.
NOTE: This feature is not available for all device models.
1
Select Share Wirelessly.
2
Select an option:
• Select Send, and select a type of data.
• Select Receive to receive data from another device. The
other compatible device must be attempting to send data.
3
Follow the on-screen instructions.
Setting a Proximity Alarm
Proximity alarms alert you when you are within a specified range
of a particular location.
1
Select Proximity Alarms > Create Alarm.
2
Select a category.
3
Select a location.
4
Select Use.
5
Enter a radius, and select .
When you enter an area with a proximity alarm, the device
sounds a tone.
Calculating the Size of an Area
1
Select Area Calculation > Start.
2
Walk around the perimeter of the area you want to calculate.
3
Select Calculate when finished.
Viewing the Calendar and Almanacs
You can view device activity, such as when a waypoint was
saved, and almanac information for the sun and moon, and
hunting and fishing.
1
Select an option:
• To view device activity for specific days, select Calendar.
• To view the sunrise, sunset, moonrise, and moonset
information, select Sun and Moon.
• To view the predicted best times for hunting and fishing,
select Hunt and Fish.
2
If necessary, select or to view a different month.
3
Select a day.
Setting an Alarm
If you are not currently using the device, you can set the device
to turn on at a specific time.
1
Select Alarm Clock.
2
Select and to set the time.
3
Select Turn Alarm On.
4
Select an option.
The alarm sounds at the selected time. If the device is off at
the alarm time, the device turns on and sounds the alarm.
Starting the Countdown Timer
1
Select Alarm Clock > > Timer.
2
Select and to set the time.
3
Select Start Timer.
Opening the Stopwatch
Select Stopwatch.
Satellite Page
The satellite page shows your current location, GPS accuracy,
satellite locations, and signal strength.
Changing the Satellite View
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select .
3
Select Track Up to orient the satellite view with your current
track toward the top of the screen.
4
Select Multicolor to assign a specific color to the satellite
and to the signal strength bar of that satellite.
Turning Off GPS
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select > Use
With GPS Off.
Simulating a Location
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select > Use
With GPS Off.
3
Swipe up from the bottom of the screen, and select > Set
Loc. On Map.
6 Applications
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin eTrex Touch 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin eTrex Touch 35 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin eTrex Touch 35

Garmin eTrex Touch 35 User Manual - German - 22 pages

Garmin eTrex Touch 35 User Manual - Dutch - 22 pages

Garmin eTrex Touch 35 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info