522230
43
Zoom out
Zoom in
Previous page
1/52
Next page
37
Appendix C
The eMap uses “pop-up” messages to alert you to unit operating characteristics.
Press the ENTER key to acknowledge and return to the page you were viewing.
Approaching Turn - You are less than one minute away from a turn in your
route.
Arriving at Destination - You have reached your destination.
Base Map Failed - The unit’s base map has failed. Return your unit to GARMIN
for service.
Batteries Low - The batteries in your unit are low and no longer capable of
supporting unit operation. Install new batteries.
Database Error - There was an error in the unit’s database.
GPS Turned Off (for use indoors) - The eMap’s GPS receiver has been turned
off to conserve battery power and speed Map Page display drawing.
Lost Satellite Reception - The unit has lost satellite signals. Try moving to
another location with a clearer view of the sky.
Memory Full - The unit’s memory is full. To reduce the amount of memory
used, delete unused routes, waypoints or tracks.
No Differential GPS Position - The beacon receiver is not communicating
with the unit. Refer to the ‘Interface’ setup page of the unit to view the ‘Status’ field.
None Found - There is no such address, intersection, point of interest, or city
in the map information database. Check spelling or number entry and try again.
RAM Failed - The eMap has detected a failure in its internal memory. If the
message persists, service is required.
ROM Failed - The permanent memory has failed and the unit is not operable.
Service is required.
Route Already Exists - The name you selected has already been assigned.
Choose another name.
Route Memory Full - No additional route waypoints can be added.
Route Truncated - A complete uploaded route will not fit into memory. Modify
the route to reduce size.
Route Waypoint Memory Full - There is no more space for map-based
waypoints.
Track Already Exists - The name selected has been assigned.
Track Memory Full - All of the saved track locations are used.
Track Truncated - A complete uploaded track will not fit into memory. Clear
existing track memory or reduce the amount of new track data.
Transfer Complete - The eMap has finished uploading or downloading
information to the connected device.
Waypoint Already Exists - The name you selected has already been assigned.
Choose another name.
Waypoint Memory Full - All of the waypoints have been assigned.
Messages
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin eMAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin eMAP in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info