Manual Garmin Edge Explore 820 (page 14 of 20) (English)

657430

Zoom out

Zoom in

1/20

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Position > Lap At.

Select an option:

• Select Lap Press Only to trigger the lap counter each

time you select and each time you pass any of those

locations again.

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (Customizing the

Data Screens, page 9).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific

distance automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 10

miles or 40 kilometers).

Select > Settings > Activity Settings.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (Customizing the

Data Screens, page 9).

Using Auto Pause

You can use the Auto Pause

feature to pause the timer

automatically when you stop moving or when your speed drops

below a specified value. This feature is helpful if your ride

includes stop lights or other places where you need to slow

down or stop.

NOTE: History is not recorded while the timer is stopped or

paused.

Select > Settings > Activity Settings.

Select Auto Features > Auto Pause.

Select an option:

• Select When Stopped to pause the timer automatically

when you stop moving.

• Select Custom Speed to pause the timer automatically

when your speed drops below a specified value.

If necessary, customize optional time data fields

(Customizing the Data Screens, page 9).

Using Auto Sleep

You can use the Auto Sleep feature to automatically enter sleep

mode after 5 minutes of inactivity. During sleep mode, the

screen is turned off and the ANT+ sensors, Bluetooth, and GPS

are disconnected.

Select > Settings > Activity Settings.

Select Auto Features > Auto Sleep.

Using Auto Scroll

You can use the Auto Scroll feature to automatically cycle

through all of the training data screens while the timer is

running.

Select > Settings > Activity Settings.

Select Auto Features > Auto Scroll.

Select a display speed.

Starting the Timer Automatically

This feature automatically detects when your device has

acquired satellites and is moving. It starts the timer or reminds

you to start the timer so you can record your ride data.

Select > Settings > Activity Settings.

Select Timer Start Mode.

Select an option:

• Select Manual, and select to start the timer.

• Select Prompted to display a visual reminder when you

reach the start notice speed.

• Select Auto to start the timer automatically when you

reach the start notice speed.

Bluetooth Settings

Select > Settings > Bluetooth.

Enable: Enables Bluetooth wireless technology.

NOTE: Other Bluetooth settings appear only when Bluetooth

wireless technology is enabled.

Friendly Name: Allows you to enter a friendly name that

identifies your devices with Bluetooth wireless technology.

Pair Smartphone: Connects your device with a compatible

Bluetooth enabled smartphone. This setting allows you to use

Bluetooth connected features, including LiveTrack and

activity uploads to Garmin Connect.

Call and Text Alerts: Allows you to enable phone notifications

from your compatible smartphone.

Missed Calls and Texts: Displays missed phone notifications

from your compatible smartphone.

System Settings

Select > Settings > System.

• Display Settings (Display Settings, page 10)

• Data Recording Settings (Data Recording Settings,

page 10)

• Unit Settings (Changing the Units of Measure, page 11)

• Tone Settings (Turning the Device Tones On and Off,

page 11)

• Language Settings (Changing the Device Language,

page 11)

Changing the Satellite Setting

For increased performance in challenging environments and

faster GPS position location, you can enable GPS+GLONASS.

Using the GPS+GLONASS setting reduces battery life more

quickly than using only GPS.

Select > Settings > System > GPS Mode.

Select an option.

Changing the Accent Color

You can change the accent color on the device.

Select > Settings > System > Color.

Select an accent color.

Display Settings

Select > Settings > System > Display.

Brightness: Sets the backlight brightness.

Backlight Timeout: Sets the length of time before the backlight

turns off.

Color Mode: Sets the device to display day or night colors. You

can select the Auto option to allow the device to set day or

night colors automatically based on the time of day.

Screen Capture: Allows you to save the image of the device

screen.

Data Recording Settings

Select > Settings > System > Data Recording.

Recording Interval: Controls how the device records activity

data. The Smart option records key points where you change

direction, speed, or heart rate. The 1 Sec option records

10 Customizing Your Device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge Explore 820 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge Explore 820

Garmin Edge Explore 820 User Manual - German - 22 pages

Garmin Edge Explore 820 User Manual - Dutch - 22 pages

Garmin Edge Explore 820 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Edge Explore 820 Manual

Product: