801355
41
Zoom out
Zoom in
Previous page
1/62
Next page
Setting Range Alerts
If you have an optional heart rate monitor, cadence sensor, or power meter, you can set up range alerts. A range
alert notifies you when the device measurement is above or below a specified range of values. For example,
you can set the device to alert you when your cadence is below 40RPM and over 90RPM. You can also use a
training zone for the range alert (Training Zones, page24).
1Select > Activity Profiles.
2Select a profile.
3Select Alerts and Prompts.
4Select Heart Rate Alert, Cadence Alert, or Power Alert.
5Select the minimum and maximum values, or select zones.
Each time you exceed or drop below the specified range, a message appears. The device also beeps if audible
tones are turned on (Turning the Device Tones On and Off, page39).
Setting Recurring Alerts
A recurring alert notifies you each time the device records a specified value or interval. For example, you can set
the device to alert you every 30 minutes.
1Select > Activity Profiles.
2Select a profile.
3Select Alerts and Prompts.
4Select an alert type.
5Turn on the alert.
6Enter a value.
7Select .
Each time you reach the alert value, a message appears. The device also beeps if audible tones are turned on
(Turning the Device Tones On and Off, page39).
Auto Lap®
Marking Laps by Position
You can use the Auto Lap feature to mark the lap at a specific position automatically. This feature is helpful for
comparing your performance over different parts of a ride (for example, a long climb or training sprints). During
courses, you can use the By Position option to trigger laps at all of the lap positions saved in the course.
1Select > Activity Profiles.
2Select a profile.
3Select Alerts and Prompts > Lap.
4Turn on the Auto Lap alert.
5Select Auto Lap Trigger > By Position.
6Select Lap At.
7Select an option:
Select Lap Press Only to trigger the lap counter each time you press and each time you pass any of
those locations again.
Select Start and Lap to trigger the lap counter at the GPS location where you press and at any location
during the ride where you press .
Select Mark and Lap to trigger the lap counter at a specific GPS location marked before the ride and at
any location during the ride where you press .
8If necessary, customize the lap data fields (Adding a Data Screen, page34).
Customizing Your Device 35
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge Explore 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge Explore 2 in the language / languages: English as an attachment in your email.

The manual is 4.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge Explore 2

Garmin Edge Explore 2 User Manual - German - 66 pages

Garmin Edge Explore 2 User Manual - Dutch - 64 pages

Garmin Edge Explore 2 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info