629020

Garmin Edge Explore 1000 Manual

7
Zoom out
Zoom in
Previous page
1/22
Next page
5
If necessary, tap the screen to view the timer overlay.
6
Select to stop the timer.
7
Select End Ride > Save Ride.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Courses
You can send a course from your Garmin Connect account to
your device. After it is saved to your device, you can navigate
the course on your device. You can also create and save a
custom course directly on your device.
You can follow a saved course simply because it is a good
route. For example, you can save and follow a bike-friendly
commute to work.
Following a Course From the Web
Before you can download a course from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect,
page 6).
1
Connect the device to your computer using the USB cable.
2
Go to www.garminconnect.com.
3
Create a new course, or select an existing course.
4
Select Send to Device.
5
Disconnect the device, and turn it on.
6
Select Courses > Saved Courses.
7
Select the course.
8
Select Ride.
Creating and Riding a Course
1
Select Courses > Course Creator > Add First Location.
2
Select an option:
• To select your current location on the map, select Current
Location.
NOTE: If the device cannot acquire satellite signals for
your current location, the device prompts you to use the
last known location or to select the location on the map.
• To select a saved location, select Saved > Locations,
and select a location.
• To select a location for which you recently searched,
select Recent Finds, and select a location.
• To select a location on the map, select Use Map, and
select a location.
• To browse for and select a point of interest, select POI
Categories, select a category, and select a nearby point
of interest.
• To select a city, select Cities, and select a nearby city.
• To select an address, select Addresses, and follow the
on-screen instructions.
• To select an intersection, select Intersections, and follow
the on-screen instructions.
• To use known coordinates for a location, select
Coordinates, and enter the coordinates.
3
Select Use.
4
Select Add Next Location.
5
Repeat steps 2 through 4 until you have selected all locations
for the course.
6
Select View Map.
The device calculates your route, and a map of the course
appears.
TIP: You can select to view an elevation plot of the course.
7
Select Ride.
8
Follow the on-screen instructions to your destination.
Calculating a Loop-to-Start Course
Before you can calculate a loop-to-start course, you must create
a course with only one location.
Select Courses > Course Creator > > Loop to Start.
The device calculates a route that loops back to the start
location, and a map of the course appears.
Calculating an Out-and-Back Course
Before you can calculate an out-and-back course, you must
create a course with two or more locations.
Select Courses > Course Creator > > Out and Back.
The device calculates a route that leads you out to and back
from the end location, and a map of the course appears.
Reversing the Course Direction
Before you can reverse the direction of a course, you must
create and calculate a course with at least one location.
Select Courses > Course Creator > > Reverse
Direction.
The device reverses the direction of navigation, and a map of
the course appears.
Saving a Course from Course Creator
1
Select Courses > Course Creator > > Save as Course >
.
2
Enter a name for the course, and select .
3
Select .
The course appears in the list.
Deleting All Locations from a Course
Select Courses > Course Creator > > Delete > .
Course Creator Settings
Select Courses > Course Creator > Settings.
Routing Mode: Sets the transportation method to optimize your
route.
Calculation Method: Sets the method used to calculate your
route.
Lock on Road: Locks the position icon, which represents your
position on the map, onto the nearest road.
Avoidance Setup: Sets the road types to avoid while
navigating.
Creating and Riding a Round-Trip Course
The device can create a round-trip course based on a specified
distance, starting location, and direction of navigation.
Navigation 3
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge Explore 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge Explore 1000 in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge Explore 1000

Garmin Edge Explore 1000 User Manual - German - 24 pages

Garmin Edge Explore 1000 User Manual - Dutch - 22 pages

Garmin Edge Explore 1000 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info