Manual Garmin Edge 530 (page 23 of 34) (English)

691267

Zoom out

Zoom in

1/34

• Select Done.

Select or to change the layout.

Select .

Select an option.

• Select a data field, then select another data field to

rearrange them.

• Select a data field twice to change it.

Select Done.

Editing a Data Screen

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Data Screens.

Select a data screen.

Select Layout and Data Fields.

Select or to change the layout.

Select .

Select an option.

• Select a data field, then select another data field to

rearrange them.

• Select a data field twice to change it.

Select Done.

Rearranging Data Screens

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Data Screens.

Select a data screen.

Select Reorder Screen.

Select or .

Select .

Alerts

You can use alerts to train toward specific time, distance,

calorie, heart rate, cadence, and power goals. Alert settings are

saved with your activity profile.

Setting Range Alerts

If you have an optional heart rate monitor, cadence sensor, or

power meter, you can set up range alerts. A range alert notifies

you when the device measurement is above or below a

specified range of values. For example, you can set the device

to alert you when your cadence is below 40 RPM and over

90 RPM. You can also use a training zone for the range alert

(Training Zones, page 9).

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Alerts.

Select Heart Rate Alert, Cadence Alert, or Power Alert.

Select the minimum and maximum values, or select zones.

Each time you exceed or drop below the specified range, a

message appears. The device also beeps if audible tones are

turned on (Turning the Device Tones On and Off, page 21).

Setting Recurring Alerts

A recurring alert notifies you each time the device records a

specified value or interval. For example, you can set the device

to alert you every 30 minutes.

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Alerts.

Select an alert type.

Turn on the alert.

Enter a value.

Select .

Each time you reach the alert value, a message appears. The

device also beeps if audible tones are turned on (Turning the

Device Tones On and Off, page 21).

Setting Smart Eat and Drink Alerts

A smart alert notifies you to eat or drink at strategic intervals

based on current ride conditions. Smart alert estimates for a ride

are based on the temperature, elevation gain, speed, duration,

and heart rate and power data (if applicable).

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Alerts.

Select Eat Alert or Drink Alert.

Turn on the alert.

Select Type > Smart.

Each time you reach the estimated smart alert value, a message

appears. The device also beeps if audible tones are turned on

(Turning the Device Tones On and Off, page 21).

Auto Lap

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific

position automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, a long

climb or training sprints). During courses, you can use the By

Position option to trigger laps at all of the lap positions saved in

the course.

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Position > Lap At.

Select an option:

• Select Lap Press Only to trigger the lap counter each

time you select and each time you pass any of those

locations again.

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (Adding a Data

Screen, page 18).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific

distance automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 10

miles or 40 kilometers).

Select Menu > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (Adding a Data

Screen, page 18).

Using Auto Sleep

You can use the Auto Sleep feature to automatically enter sleep

mode after 5 minutes of inactivity. During sleep mode, the

screen is turned off and the ANT+ sensors, Bluetooth, and GPS

are disabled.

Wi‑Fi continues to run while the device is asleep.

Customizing Your Device 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 530 in the language / languages: English as an attachment in your email.

The manual is 6,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 530

Garmin Edge 530 User Manual - German - 38 pages

Garmin Edge 530 User Manual - Dutch - 36 pages

Garmin Edge 530 User Manual - French - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Edge 530 Manual

Product: