691275

Garmin Edge 130 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
2
Plug the small end of the USB cable into the USB port on the
device.
3
Plug the large end of the USB cable into an AC adapter or a
computer USB port.
4
Plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device
turns on.
5
Charge the device completely.
About the Battery
WARNING
This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
TIP: For more information about GPS, go to www.garmin.com
/aboutGPS.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Viewing Widgets
Your device comes preloaded with several widgets. You should
pair your device with a smartphone to get the most of out your
Edge device.
• From the home screen, select or .
The device scrolls through the widget loop.
• While in an active widget, select to view additional options
for that widget.
Using the Backlight
• To turn on the backlight, select any key.
• To adjust the timeout, hold , select System > Backlight
Timeout, and select an option.
Training
Going for a Ride
If your device was packaged with an ANT+
®
sensor, they are
already paired and can be activated during initial setup.
1
Hold to turn on the device.
2
Go outside, and wait while the device locates satellites.
appears solid when the device is ready.
3
From the home screen, select .
4
Select to start the activity timer.
NOTE: History is recorded only while the activity timer is
running.
5
Select to stop the activity timer.
6
Select an option:
• Select Resume to resume your ride.
• Select Save Ride to stop your ride and save it.
TIP: You can select the ride type. Accurate ride type data
is important for creating bike friendly courses on your
Garmin Connect account.
• Select Discard Ride to stop your ride and delete it from
your device.
• Select Back to Start to navigate back to your starting
location.
• Select Mark Location to mark your location and save it.
Following a Saved Ride
1
Hold .
2
Select Navigation > Ride an Activity.
3
Select a ride.
TIP: You can select to view more detailed information
about your ride, such as a summary, map location, lap
details, or to delete this ride.
4
Select Ride.
5
Select to start the activity timer.
Segments
Following a segment: You can send segments from your
Garmin Connect account to your device. After a segment is
saved to your device, you can follow the segment.
2 Training
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

garmin-edge-130

Reset search

  • how do I change the number of fields on my display? Submitted on 15-8-2020 at 02:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 130 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 130

Garmin Edge 130 User Manual - German - 22 pages

Garmin Edge 130 User Manual - Dutch - 22 pages

Garmin Edge 130 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info