725379
7
Zoom out
Zoom in
Previous page
1/22
Next page
6
If necessary, use the 2 mm hex key to remove the two
screws on the back side of the mount , remove and rotate
the connector, and replace the screws to change the
orientation of the mount.
7
Replace and tighten the screw on the handlebar connector.
NOTE: Garmin recommends tightening the screw so the
mount is secure, with a maximum torque specification of
7 lbf-in. (0.8 N-m). You should check the tightness of the
screw periodically.
8
Align the tabs on the back of the Edge device with the bike
mount notches .
9
Press down slightly and turn the Edge device clockwise until
it locks into place.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
TIP: For more information about GPS, go to www.garmin.com
/aboutGPS.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Training
Going for a Ride
If your device was packaged with an ANT+
®
sensor, they are
already paired and can be activated during initial setup.
1
Hold to turn on the device.
2
Go outside, and wait while the device locates satellites.
appears solid when the device is ready.
3
From the home screen, select .
4
Select the ride type.
TIP: Accurate ride type data is important for creating bike
friendly courses on your Garmin Connect account.
5
Select to start the activity timer.
NOTE: History is recorded only while the activity timer is
running.
6
Select to stop the activity timer.
7
Select an option:
Select Resume to resume your ride.
Select Save Ride to stop your ride and save it.
Select Discard Ride to stop your ride and delete it from
your device.
Select Back to Start to navigate back to your starting
location.
Select Mark Location to mark your location and save it.
Select Main Menu to return to the main menu.
Following a Saved Ride
1
Hold .
2
Select Navigation > Ride an Activity.
3
Select a ride.
TIP: You can select to view more detailed information
about your ride, such as a summary, map location, lap
details, or to delete this ride.
4
Select Ride.
5
Select to start the activity timer.
Segments
Following a segment: You can send segments from your
Garmin Connect account to your device. After a segment is
saved to your device, you can follow the segment.
NOTE: When you download a course from your Garmin
Connect account, all segments in the course are downloaded
automatically.
Racing a segment: You can race a segment, trying to match or
exceed your personal record or other cyclists who have
ridden the segment.
Strava
Segments
You can download Strava segments to your Edge 130 Plus
device. Follow Strava segments to compare your performance
with your past rides, friends, and pros who have ridden the
same segment.
To sign up for a Strava membership, go to the segments widget
in your Garmin Connect account. For more information, go to
www.strava.com.
The information in this manual applies to both Garmin Connect
segments and Strava segments.
Following a Segment From Garmin Connect
Before you can download and follow a segment from Garmin
Connect, you must have a Garmin Connect account (Garmin
Connect, page 10).
NOTE: If you are using Strava segments, your favorite
segments are transferred automatically to your device when it is
connected to the Garmin Connect app or your computer.
1
Select an option:
Open the Garmin Connect app.
Go to connect.garmin.com.
2
Create a new segment, or select an existing segment.
3
Select or Send to Device.
4
Follow the on-screen instructions.
5
On the Edge device, select to start the activity timer, and
go for a ride.
When your path crosses an enabled segment, you can race
the segment.
Training 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin EDGE 130 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin EDGE 130 PLUS in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin EDGE 130 PLUS

Garmin EDGE 130 PLUS User Manual - German - 24 pages

Garmin EDGE 130 PLUS User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info