691269
25
Zoom out
Zoom in
Previous page
1/32
Next page
1
Locate the circular memory card cover on the back of the
device.
2
Use a coin to twist the cover counter-clockwise until it is
loose enough to remove.
3
Remove the cover.
4
Slide the card holder
À
, and lift up.
5
Place the memory card
Á
into the card holder, with the gold
contacts facing down.
6
Close the card holder, and slide to lock it.
7
Replace the cover, making sure the indicator points to .
8
Use a coin to twist the cover clockwise back into place,
making sure the indicator points to .
User Replaceable Batteries
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Replacing the Heart Rate Monitor Battery
1
Use a small Phillips screwdriver to remove the four screws on
the back of the module.
2
Remove the cover and battery.
3
Wait 30 seconds.
4
Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
5
Replace the back cover and the four screws.
NOTE: Do not overtighten.
After you replace the heart rate monitor battery, you may need
to pair it with the device again.
Replacing the Speed Sensor or Cadence Sensor
Battery
The LED flashes red to indicate a low battery level after two
revolutions.
1
Locate the circular battery cover
À
on the back of the sensor.
2
Twist the cover counter-clockwise until the marker points to
unlocked and the cover is loose enough to remove.
3
Remove the cover and the battery
Á
.
TIP: You can use a piece of tape
Â
or a magnet to remove
the battery from the cover.
4
Wait 30 seconds.
5
Insert the new battery into the cover, observing polarity.
NOTE: Do not damage or lose the O-ring gasket.
6
Twist the cover clockwise until the marker points to locked.
NOTE: The LED flashes red and green for a few seconds
after battery replacement. When the LED flashes green and
then stops flashing, the device is active and ready to send
data.
Troubleshooting
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
Hold for 10 seconds.
The device resets and turns on.
Restoring the Default Settings
You can restore the default configuration settings and activity
profiles. This will not remove your history or activity data, such
as rides, workouts, and courses.
Select > System > Device Reset > Restore Default
Settings > .
Clearing User Data and Settings
You can clear all user data and restore the device to its initial
setup. This removes your history and data, such as rides,
workouts, and courses, and resets the device settings and
activity profiles. This will not remove any files you added to the
device from your computer.
Select > System > Device Reset > Clear Data and
Settings > .
Maximizing Battery Life
Turn on Battery Save Mode (Turning On Battery Save
Mode, page 22).
Decrease the backlight brightness or shorten the backlight
timeout (Display Settings, page 19).
Select the Smart recording interval (Data Recording Settings,
page 19).
Turn on the Auto Sleep feature (Using Auto Sleep, page 19).
Turn off the Phone wireless feature (Phone Settings,
page 19).
Select the GPS setting (Changing the Satellite Setting,
page 18).
Troubleshooting 21
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge 1030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 1030 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 1030

Garmin Edge 1030 User Manual - German - 36 pages

Garmin Edge 1030 User Manual - Dutch - 36 pages

Garmin Edge 1030 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info