Manual Garmin ECHOMAP Ultra serie (page 18 of 52) (English)

691420

Zoom out

Zoom in

1/52

The 50 nearest destinations that contain your search criteria

appear.

Select the destination.

Selecting a Destination Using the Navigation Chart

From the Navigation chart, select a destination.

Searching for a Marine Services Destination

NOTE: This feature is available with premium charts, in some

areas.

The chartplotter contains information for thousands of

destinations offering marine services.

Select Nav Info.

Select Offshore Services or Inland Services.

If necessary, select the marine service category.

The chartplotter shows a list of the nearest locations and the

distance and bearing to each.

Select a destination.

You can select or to view additional information or to

show the location on a chart.

Setting and Following a Direct Course Using Go To

WARNING

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location

to a selected destination.

Select a destination (Destinations, page 11).

Select Navigate To > Go To.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your current location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

You can also use the orange course-to-steer arrow, which

shows a proposed turning radius to return your boat to the

course.

WARNING

Review the path for obstacles before negotiating the turn. If

the path is unsafe, reduce your boat speed and determine a

safe path back to the course.

Stopping Navigation

From the Navigation chart or Fishing chart, select Menu >

Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

Marking Your Present Location as a Waypoint

From any screen, select Mark.

Creating a Waypoint at a Different Location

Select Nav Info > Waypoints > New Waypoint.

Select an option:

• To create the waypoint by entering position coordinates,

select Enter Coordinates, and enter the coordinates.

• To create the waypoint using a chart, select Use Chart,

select the location, and select Select Position.

• To create the waypoint using a range (distance) and

bearing, select Enter Range/Bearing, and enter the

information.

Marking an MOB Location

Select Mark > Man Overboard.

An international man overboard (MOB) symbol marks the active

MOB point and the chartplotter sets a direct course back to the

marked location.

Projecting a Waypoint

You can create a new waypoint by projecting the distance and

bearing from a different location. This can be helpful when

creating sail racing start and finish lines.

Select Nav Info > Waypoints > New Waypoint > Enter

Range/Bearing.

if necessary, select a reference point on the chart.

Select Enter Range/Bearing.

Enter the distance, and select Done.

Enter the bearing, and select Done.

Select Position.

Viewing a List of all Waypoints

Select Nav Info > Waypoints.

Editing a Saved Waypoint

Select Nav Info > Waypoints.

Select a waypoint.

Select Review > Edit Waypoint.

Select an option:

• To add a name, select Name, and enter a name.

• To change the symbol, select Symbol.

• To change the depth, select Depth.

• To change the water temperature, select Water Temp..

• To change the comment, select Comment.

• To move the position of the waypoint, select Move.

Moving a Saved Waypoint

Select Nav Info > Waypoints.

Select a waypoint.

Select Review > Move.

Indicate a new location for the waypoint:

• To move the waypoint while using the chart, select Use

Chart, select a new location on the chart, and select

Move.

• To move the waypoint using coordinates, select Enter

Coordinates, and enter the new coordinates.

• To move the waypoint using a range (distance) and

bearing, select Enter Range/Bearing, and enter the

information.

Browsing for and Navigating to a Saved Waypoint

WARNING

All route and navigation lines displayed on the chartplotter are

only intended to provide general route guidance or to identify

proper channels, and are not intended to be precisely followed.

Always defer to the navaids and conditions on the water when

navigating to avoid groundings or hazards that could result in

vessel damage, personal injury, or death.

12 Navigation with a Chartplotter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin ECHOMAP Ultra serie in the language / languages: English as an attachment in your email.

The manual is 5,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin ECHOMAP Ultra serie

Garmin ECHOMAP Ultra serie Installation Guide - English - 4 pages

Garmin ECHOMAP Ultra serie User Manual - German - 60 pages

Garmin ECHOMAP Ultra serie Installation Guide - German - 4 pages

Garmin ECHOMAP Ultra serie Installation Guide - Dutch - 4 pages

Garmin ECHOMAP Ultra serie User Manual - Dutch - 56 pages

Garmin ECHOMAP Ultra serie Installation Guide - French - 4 pages

Garmin ECHOMAP Ultra serie User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin ECHOMAP Ultra serie Manual

Product: