590086
13
Zoom out
Zoom in
Previous page
1/30
Next page
Stopping Navigation
From the Navigation chart or Fishing chart, select MENU >
Stop Navigation.
Waypoints
Waypoints are locations you record and store in the device.
Marking Your Present Location as a Waypoint
From any screen, select MARK.
Creating a Waypoint at a Different Location
1
Select User Data > Waypoints > New Waypoint.
2
Select an option:
To create the waypoint by entering position coordinates,
select Enter Coordinates, and enter the coordinates.
To create the waypoint using a chart, select Route Using
Chart, select the location, and select SELECT.
Marking an MOB or SOS Location
From the Home screen, select Man Overboard > Yes.
An international man overboard (MOB) symbol marks the active
MOB point and the chartplotter sets a direct course back to the
marked location.
Viewing a List of all Waypoints
Select User Data > Waypoints.
Editing a Saved Waypoint
1
Select User Data > Waypoints.
2
Select a waypoint.
3
Select Edit Waypoint.
4
Select an option:
To add a name, select Name, and enter a name.
To change the symbol, select Symbol.
To change the depth, select Depth.
To change the water temperature, select Water Temp..
To change the comment, select Comment.
To move the position of the waypoint, select Move.
Browsing for and Navigating to a Saved Waypoint
CAUTION
The Auto Guidance feature is based on electronic chart
information. That data does not ensure obstacle and bottom
clearance. Carefully compare the course to all visual sightings,
and avoid any land, shallow water, or other obstacles that may
be in your path.
When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
NOTE: Auto Guidance is available with premium charts, in some
areas.
Before you can navigate to a waypoint, you must create a
waypoint.
1
Select User Data > Waypoints.
2
Select a waypoint.
3
Select Navigate To.
4
Select an option:
To navigate directly to the location, select Go To.
To create a route to the location, including turns, select
Route To.
To use Auto Guidance, select Guide To.
5
Review the course indicated by the magenta line.
NOTE: When using Auto Guidance, a gray segment within
any part of the magenta line indicates that Auto Guidance
cannot calculate part of the Auto Guidance line. This is due to
the settings for minimum safe water depth and minimum safe
obstacle height.
6
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
Deleting a Waypoint or an MOB
1
Select User Data > Waypoints.
2
Select a waypoint or an MOB.
3
Select Delete.
Deleting All Waypoints
Select User Data > Manage Data > Clear User Data >
Waypoints > All.
Routes
A route is a sequence of waypoints or locations that leads you to
your final destination.
Creating and Navigating a Route from Your Present
Location
You can create and immediately navigate a route on the
Navigation chart or the Fishing chart. This procedure does not
save the route or the waypoint data.
1
From the Navigation chart or Fishing chart, select a
destination.
2
Select Navigate To > Route To.
3
Select the location of the last turn before the destination.
4
Follow the onscreen instructions.
5
If necessary, repeat step 3 and 4 to add additional turns,
working backward from the destination to the present location
of your vessel.
The last turn you add should be the first turn you make,
starting from your present location. It should be the turn
closest to your vessel.
6
If necessary, select MENU.
7
Select Navigate Route.
8
Review the course indicated by the magenta line.
9
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
Creating and Saving a Route
This procedure saves the route and all the waypoints in it. The
starting point can be your present location or another location.
1
Select User Data > Routes > New > Route Using Chart.
2
Select the starting location of the route.
3
Follow the onscreen instructions to add a turn.
4
If necessary, repeat step 3 to add more turns.
5
Select the final destination.
Viewing a List of Routes
Select User Data > Routes.
Editing a Saved Route
You can change the name of a route or change the turns the
route contains.
1
Select User Data > Routes.
2
Select a route.
3
Select Edit Route.
4
Select an option:
To change the name, select Name, and enter the name.
To select a waypoint from the turn list, select Edit Turns >
Use Turn List, and select a waypoint from the list.
Navigation with a Chartplotter 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin echoMAP 43dv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin echoMAP 43dv in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info