Manual Garmin DRIVESMART 65 (page 17 of 28) (English)

699245

Zoom out

Zoom in

1/28

Saving a Home Phone Number

TIP: After you save a home number, you can edit the home

number by editing “Home” in your list of saved locations (Editing

a Saved Location, page 6).

Select Apps > Phone > > Set Home Number.

Enter your phone number.

Select Done.

Calling Home

Before you can call home, you must enter a phone number for

your home location.

Select Apps > Phone > Call Home.

Deleting a Paired Phone

You can delete a paired phone to prevent it from automatically

connecting to your device in the future.

Select Settings > Wireless Networks.

Select the phone, and select Unpair device.

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the

traffic information.

Your device can provide information about traffic on the road

ahead or on your route. You can set your device to avoid traffic

when calculating routes, and to find a new route to your

destination if a large traffic delay occurs on your active route

(Traffic Settings, page 17). The traffic map allows you to

browse the map for traffic delays in your area.

To provide traffic information, your device must be receiving

traffic data.

• Product models ending with MT can receive traffic data from

an over-the-air broadcast signal using the built-in traffic

receiver and the included vehicle power cable (Receiving

Traffic Data Using a Traffic Receiver, page 13).

• All product models can receive subscription-free traffic data

using the Garmin Drive app (Receiving Traffic Data Using

Your Smartphone, page 13).

Traffic data is not available in all areas. For information about

traffic coverage areas, go to garmin.com/traffic.

Receiving Traffic Data Using Your

Smartphone

Your device can receive subscription-free traffic data while

connected to a smartphone running the Garmin Drive app.

Connect your device to the Garmin Drive app (Live Services,

Traffic, and Smartphone Features, page 11).

On your Garmin DriveSmart device, select Settings >

Traffic, and verify the Traffic check box is selected.

Receiving Traffic Data Using a Traffic

Receiver

NOTICE

Heated (metallized) windshields could degrade the performance

of the traffic receiver.

A traffic receiver receives traffic data from an over-the-air

broadcast signal, where available. To receive over-the-air traffic

data, the device must be connected to vehicle power using a

traffic-compatible power cable. A traffic receiver is included with

some product models (Traffic, page 13). .

Traffic data is not available in all areas. For information about

traffic coverage areas, go to garmin.com/traffic.

Connect the device to vehicle power using the traffic

compatible power cable (Mounting and Powering the Garmin

DriveSmart Device in Your Vehicle, page 1).

If your product model includes traffic data, the vehicle power

cable included with your device is traffic compatible.

When you are within a traffic coverage area, your device can

display traffic information and help you avoid traffic delays.

Traffic Receiver Subscriptions

A regional traffic data subscription is included with most traffic

receivers. You can add subscriptions for additional regions to

your traffic receiver. For more information, go to garmin.com

/traffic.

Viewing Traffic Subscriptions

Select Settings > Traffic > Subscriptions.

Adding a Subscription

You can purchase traffic subscriptions for other regions or

countries.

Select Settings > Traffic.

Select Subscriptions > .

Write down the FM traffic receiver unit ID.

Go to www.garmin.com/fmtraffic to purchase a subscription

and get a 25-character code.

The traffic subscription code cannot be reused. You must

obtain a new code each time you renew your service. If you

own multiple FM traffic receivers, you must obtain a new

code for each receiver.

Select Next on the device.

Enter the code.

Select Done.

Enabling Traffic

You can enable or disable traffic data.

Select Settings > Traffic.

Select the Traffic check box.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on

nearby roads.

From the main menu, select Apps > Traffic.

If necessary, select > Legend to view the legend for the

traffic map.

Searching for Traffic Incidents

From the main menu, select Apps > Traffic.

Select > Incidents.

Select an item in the list.

If there is more than one incident, use the arrows to view

additional incidents.

Voice Command

NOTE: Voice command is not available for all languages and

regions, and may not be available on all models.

NOTE: Voice Activated Navigation may not achieve desired

performance when in a noisy environment.

Voice command allows you to use your device by saying words

and commands. The voice command menu provides voice

prompts and a list of available commands.

Setting the Wakeup Phrase

The wakeup phrase is a word or phrase you can say to activate

voice command. The default wakeup phrase is OK Garmin.

Traffic 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin DRIVESMART 65 in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin DRIVESMART 65

Garmin DRIVESMART 65 User Manual - German - 32 pages

Garmin DRIVESMART 65 User Manual - Dutch - 30 pages

Garmin DRIVESMART 65 User Manual - French - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin DRIVESMART 65 Manual

Product: