Manual Garmin Drive Smart 60 (page 20 of 26) (English)

636432

Zoom out

Zoom in

1/26

Select Touch to Add.

Select a road.

Select an intersection.

Select Save.

Viewing a Traffic Camera

Before you can view a traffic camera, you must save a traffic

camera (Saving a Traffic Camera, page 15).

Select Apps > photoLive.

Select a camera.

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel

history feature (Device and Privacy Settings, page 17).

You can view your previous routes and places you have stopped

on the map.

Select Apps > Where I've Been.

Customizing the Device

Map and Vehicle Settings

Select Settings > Map & Vehicle.

Vehicle: Sets the icon that represents your position on the map.

Go to www.garmingarage.com for more icons.

Driving Map View: Sets the perspective on the map.

Map Detail: Sets the level of detail on the map. More detail may

cause the map to draw slower.

Map Theme: Changes the color of the map data.

Map Tools: Sets the shortcuts that appear in the map tools

menu.

Map Layers: Sets the data that appears on the map page

(Customizing the Map Layers, page 10).

Audible Driver Alerts: Enables an audible alert for each type of

driver alert (Driver Awareness Features and Alerts, page 3).

: Automatically selects the zoom level for optimal use of your

map. When disabled, you must zoom in or out manually.

myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.

TIP: To purchase additional map products, go to

http://buy.garmin.com.

Select Settings > Map & Vehicle > myMaps.

Select a map.

Navigation Settings

Select Settings > Navigation.

Route Preview: Shows a preview of the major roads in your

route when you start navigation.

Calculation Mode: Sets the route calculation method.

Fatigue Warning: Alerts you when you have been driving for a

long period without a break.

Avoidances: Sets road features to avoid on a route.

Custom Avoidances: Allows you to avoid specific roads or

areas.

Environmental Zones: Sets the avoidance preferences for

areas with environmental or emissions restrictions that may

apply to your vehicle.

Toll Roads: Sets preferences for avoiding toll roads.

Tolls and Fees: Sets preferences for avoiding toll roads and toll

stickers.

NOTE: This feature is not available in all areas.

Restricted Mode: Disables all functions that require significant

operator attention and could become a distraction while

driving.

GPS Simulator: Stops the device from receiving a GPS signal,

and saves battery power.

Calculation Mode Settings

Select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle

acceleration data for a given route.

Faster Time: Calculates routes that are faster to drive but can

be longer in distance.

Shorter Distance: Calculates routes that are shorter in distance

but can take more time to drive.

Off Road: Calculates a direct line from your location to your

destination.

Setting a Simulated Location

If you are indoors or not receiving satellite signals, you can use

the GPS to set a simulated location.

Select Settings > Navigation > GPS Simulator.

From the main menu, select View Map.

Tap the map twice to select an area.

The address of the location appears at the bottom of the

screen.

Select the location description.

Select Set Location.

Backup Camera Settings

The backup camera settings allow you to manage paired

Garmin backup cameras and camera settings. This menu

appears on your navigation device only when the device is

connected to a wireless camera receiver cable. See the owner's

manual for your backup camera for detailed information about

pairing cameras and camera settings. Go to garmin.com

/backupcamera to purchase a Garmin backup camera.

Select Settings > Backup Camera, and select a paired camera.

Unpair: Removes the paired camera. You must pair the camera

again before you can view it using this device and cable.

Rename: Allows you to rename the paired camera.

Guidance Lines: Shows or hides guidance lines and allows you

to adjust the position of the guidance lines.

babyCam Settings

The babyCam settings allow you to manage paired Garmin

babyCam

™

cameras and camera settings. This menu appears

on your navigation device only when the device is connected to

a wireless camera receiver cable. See the owner's manual for

your camera for detailed information about pairing cameras and

camera settings. Go to garmin.com/babycam to purchase a

Garmin babyCam camera.

Select Settings > babyCam, and select a paired camera.

Power Settings: Allows you to set the amount of time the video

appears on the screen.

Flip Video: Allows you to flip or mirror the video.

Alignment: Displays the babyCam video to help you align the

camera.

Check Seat Reminder: Enables a reminder to check for rear

seat passengers before exiting the vehicle.

Unpair: Removes the paired camera.

Rename: Allows you to rename the paired camera.

16 Customizing the Device

How to change French language to English on garmin drivesmat 60 Submitted on 11-1-2022 at 21:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Drive Smart 60 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Drive Smart 60

Garmin Drive Smart 60 User Manual - German - 30 pages

Garmin Drive Smart 60 User Manual - Dutch - 28 pages

Garmin Drive Smart 60 User Manual - French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Drive Smart 60 Manual

Product: