Manual Garmin Drive Smart 50 (page 10 of 26) (English)

636431

Zoom out

Zoom in

1/26

Changing Routing Options for a Trip

You can customize how the device calculates the route when

you start your trip.

Select Apps > Trip Planner.

Select a saved trip.

Select > Trip Settings.

Select an option:

• To add shaping points to your trip, select Shape Route,

and follow the on-screen instructions (Shaping Your

Route, page 5).

• To change the calculation mode for the trip, select Route

Preference (Changing the Route Calculation Mode,

page 5).

Scheduling a Trip

You can add scheduling information to each location in your trip,

including the desired arrival time and layover duration at each

location. This can help you plan your departure to reach

locations in your trip on time.

Select Apps > Trip Planner.

Select a trip.

Select > Trip Settings > Edit Schedule.

Select a location, and follow the on-screen instructions to

enter the schedule information.

TIP: If you need to schedule multiple locations in the trip, you

should start from the beginning of the trip and work toward

the end.

Repeat step 4 to enter schedule information for additional

locations.

When finished, select Save.

When you navigate the trip, you should depart by the time

shown under the starting point to reach your stops and

destinations by the scheduled time. The schedule is an estimate

only. Traffic conditions, construction, and other delays may

affect your actual arrival times.

Using Suggested Routes

Before you can use this feature, you must save at least one

location and enable the travel history feature (Device and

Privacy Settings, page 17).

Using the myTrends

™

feature, your device predicts your

destination based on your travel history, the day of the week,

and the time of day. After you have driven to a saved location

several times, the location may appear in the navigation bar on

the map, along with the estimated time of travel, and traffic

information.

Select the navigation bar to view a suggested route to the

location.

Avoiding Delays, Tolls, and Areas

Avoiding Traffic Delays on Your Route

Before you can avoid traffic delays, you must be receiving traffic

information (Receiving Traffic Data Using a Traffic Receiver,

page 11).

By default, the device optimizes your route to avoid traffic delays

automatically. If you have disabled this option in the traffic

settings (Traffic Settings, page 17), you can view and avoid

traffic delays manually.

While navigating a route, select > Traffic.

Select Alternate Route, if available.

Select Go!.

Avoiding Toll Roads

Your device can avoid routing you through areas that require

tolls, such as toll roads, toll bridges, or congestion areas. The

device may still include a toll area in your route if no other

reasonable routes are available.

Select Settings > Navigation.

Select an option:

NOTE: The menu changes based on your area and the map

data on your device.

• Select Toll Roads.

• Select Tolls and Fees > Toll Roads.

Select an option:

• To be asked each time before routing through a toll area,

select Always Ask.

• To always avoid tolls, select Avoid.

• To always allow tolls, select Allow.

Select Save.

Avoiding Toll Stickers

NOTE: This feature is not available in all areas.

The map data on your device may contain detailed toll sticker

information for some countries. You can avoid or allow toll

stickers for each country.

Select Settings > Navigation > Tolls and Fees > Toll

Stickers.

Select a country.

Select an option:

• To be asked each time before routing through a toll area,

select Always Ask.

• To always avoid tolls, select Avoid.

• To always allow tolls, select Allow.

Select Save.

Avoiding Road Features

Select Settings > Navigation > Avoidances.

Select the road features to avoid on your routes, and select

Save.

Avoiding Environmental Zones

Your device can avoid areas with environmental or emissions

restrictions that may apply to your vehicle.

Select Settings > Navigation > Environmental Zones.

Select an option:

• To be asked each time before routing through an

environmental zone, select Always Ask.

• To always avoid environmental zones, select Avoid.

• To always allow environmental zones, select Allow.

Select Save.

Custom Avoidances

Custom avoidances allow you select specific areas or sections

of road to avoid. When the device calculates a route, it avoids

these areas and roads unless no other reasonable route is

available.

Avoiding a Road

Select Settings > Navigation > Custom Avoidances.

Select Add Avoid Road.

Select the starting point of the section of road to avoid, and

select Next.

Select the ending point of the road section, and select Next.

Select Done.

6 Navigating to Your Destination

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Drive Smart 50 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Drive Smart 50

Garmin Drive Smart 50 User Manual - German - 30 pages

Garmin Drive Smart 50 User Manual - Dutch - 28 pages

Garmin Drive Smart 50 User Manual - French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Drive Smart 50 Manual

Product: