Manual Garmin Drive 40 (page 7 of 20) (English)

650673

Zoom out

Zoom in

1/20

School zone or nearby school: The device plays a tone and

displays the distance to and speed limit (if available) for an

upcoming school or school zone.

Speed limit reduction: The device plays a tone and displays

the upcoming reduced speed limit so you can be prepared to

reduce your speed.

Speed limit exceeded: The device plays a tone and displays a

red border on the speed limit icon when you exceed the

posted speed limit for the current road.

Wrong way on a one-way street: The device plays a message

and displays a full-screen warning if you travel the wrong way

on a one-way street. The edges of the screen appear red and

an alert remains at the top of the screen until you leave the

one-way street or correct your direction of travel.

Railroad crossing: The device plays a tone and displays the

distance to an upcoming railroad crossing.

Animal crossing: The device plays a tone and displays the

distance to an upcoming animal crossing area.

Curve: The device plays a tone and displays the distance to a

curve in the road.

Slower traffic: The device plays a tone and displays the

distance to slower traffic when you approach slower traffic at

a higher speed. Your device must be receiving traffic

information to use this feature (Receiving Traffic Data Using

a Traffic Receiver, page 10).

Fatigue warning: The device plays a tone and suggests

upcoming rest stops after you have been driving for more

than two hours without stopping.

Enabling or Disabling Audible Driver Alerts

You can turn off individual audible driver alerts. The visual alert

appears even when the audible alert is disabled.

Select Settings > Map & Vehicle > Audible Driver Alerts.

Select or clear the check box next to each alert.

Red Light and Speed Cameras

NOTICE

Garmin is not responsible for the accuracy of or the

consequences of using a red light or speed camera database.

NOTE: This feature is not available for all regions or product

models.

Information about red light and speed camera locations is

available in some areas for some product models. Go to

garmin.com/speedcameras to check availability and

compatibility, or to purchase a subscription or one-time update.

You can purchase a new region or extend an existing

subscription at any time.

You can go to mygarmin.com to update the camera database on

your device. You should update your device frequently to

receive the most up-to-date camera information.

For some devices and regions, basic red light or speed camera

data may be included with your device. Included data does not

include updates or a subscription.

Navigating to Your Destination

Routes

A route is a path from your current location to one or more

destinations.

• The device calculates a recommended route to your

destination based on the preferences you set, including the

route calculation mode (Changing the Route Calculation

Mode, page 4) and avoidances (Avoiding Delays, Tolls,

and Areas, page 5).

• You can start navigating to your destination quickly using the

recommended route, or you can select an alternate route

(Starting a Route, page 3).

• If there are specific roads you need to use or avoid, you can

customize the route (Shaping Your Route, page 4).

• You can add multiple destinations to a route (Adding a

Location to Your Route, page 4).

Starting a Route

Select Where To?, and search for a location (Finding and

Saving Locations, page 6).

Select a location.

Select an option:

• To start navigating using the recommended route, select

Go!.

• To choose an alternate route, select , and select a route.

Alternate routes appear to the right of the map.

• To edit the course of the route, select > Edit Route, and

add shaping points to the route (Shaping Your Route,

page 4).

The device calculates a route to the location and guides you

using voice prompts and information on the map (Your Route on

the Map, page 3). A preview of the major roads in your route

appears at the edge of the map for several seconds.

If you need to stop at additional destinations, you can add the

locations to your route (Adding a Location to Your Route,

page 4).

Starting a Route by Using the Map

You can start route by selecting a location from the map.

Select View Map.

Drag and zoom the map to display the area to search.

If necessary, select to filter the displayed points of interest

by category.

Location markers ( or a blue dot) appear on the map.

Select an option:

• Select a location marker.

• Select a point, such as a street, intersection, or address

location.

Select Go!.

Going Home

The first time you start a route home, the device prompts you to

enter your home location.

Select Where To? > Go Home.

If necessary, enter your home location.

Editing Your Home Location

Select Where To? > Saved > Set Home Location.

Enter your home location.

Your Route on the Map

NOTICE

The speed limit feature is for information only and does not

replace your responsibility to abide by all posted speed limit

signs and to use safe driving judgment at all times. Garmin will

not be responsible for any traffic fines or citations you receive for

failing to follow all applicable traffic laws and signs.

As you travel, the device guides you to your destination using

voice prompts and information on the map. Instructions for your

next turn or exit, or other action appear across the top of the

map.

Navigating to Your Destination 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Drive 40 in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Drive 40

Garmin Drive 40 User Manual - German - 24 pages

Garmin Drive 40 User Manual - Dutch - 22 pages

Garmin Drive 40 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Drive 40 Manual

Product: