563575
6
Zoom out
Zoom in
Previous page
1/24
Next page
Low Power Mode
The compass page displays the
time of day À, direction of travel in
degrees Á, and cardinal direction
Â.
The altimeter page displays the
time of day À, pressure altitude
Á, and barometric pressure Â.
The temperature page displays the
time of day À, temperature Á,
and density altitude Â.
Tracking or Navigation Modes
The compass page displays the
bearing to the nearest airport À,
compass ring Á, and direction of
travel in degrees  (tracking
mode only).
The horizontal situation indicator
(HSI) displays the course line
pointer À, bearing to the next
waypoint Á, to-and-from indicator
Â, and course deviation indicator
(CDI) Ã. The dots Ä indicate the
distance of deviation (navigation
mode only).
The altimeter page displays the
alert altitude À (Setting the
Altitude Alert), pressure altitude
Á, and barometric pressure Â.
The temperature page displays the
time of day À, temperature Á,
and density altitude Â.
The map displays your current
location and direction À, the route
to your next waypoint Á, and the
bearing to your next waypoint Â.
The nearest airport page displays
the airport identifier À, bearing to
the airport Á, distance to the
airport Â, track over ground Ã,
and the estimated time to the
airport Ä.
Tracking or Navigation Modes
The instruments page displays
your ground speed À, altitude Á,
track over ground Â, and the
vertical speed in feet per minute
Ã.
The next waypoint page displays
the waypoint name À, bearing to
the waypoint Á, distance to the
waypoint Â, track over ground Ã,
and the estimated time to the next
waypoint Ä (navigation mode
only).
Setting the Altitude Alert
You can set an alarm to vibrate when you reach a specified
altitude.
NOTE: The altitude alert is not available in low power mode.
1From the time of day page, select until the altimeter page
appears.
2Select the action key.
3Select Set Alert.
4Enter the altitude at which the alert is triggered.
Setting the Barometric Pressure
You can manually enter the current barometric pressure. This
can help to improve the accuracy of the pressure altitude
reading.
1From the time of day page, select until the altimeter page
appears.
2Select the action key.
3Select Set Baro..
4Enter the current barometric pressure.
Turning on a Sensor Mode
The default sensor mode is on demand mode, which offers you
quick access to compass, altimeter, barometer, or temperature
data. You can also put the device in always on mode to display
continuous sensor data.
NOTE: If you have an optional heart rate monitor or speed and
cadence sensor paired with the device, your device can display
continuous heart rate or speed and cadence data.
1Select the action key.
2Select Setup > Sensors > Mode > Always On.
Acquiring Satellite Signals and Recording a
Track
Before you can use the GPS navigation features, such as
recording a track, you must acquire satellite signals.
The time and date are set automatically based on the GPS
position.
1Select the action key.
2Select Start GPS.
3Go to an area with a clear view of the sky and remain
stationary while the device acquires satellite signals.
indicates the device acquired satellite signals
successfully.
4Walk around or travel to record a track.
Your distance and time appear.
5Select to view the loop of data pages.
6Hold .
2 Introduction
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin D2 Pilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin D2 Pilot in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin D2 Pilot

Garmin D2 Pilot Quick start guide - English - 4 pages

Garmin D2 Pilot User Manual - German - 26 pages

Garmin D2 Pilot User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info