Manual Garmin D2 Delta S (page 39 of 52) (English)

674101

Zoom out

Zoom in

1/52

Follow the on-screen instructions.

TIP: Move your wrist in a small figure eight motion until a

message appears.

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold MENU.

Select Settings > Sensors & Accessories > Compass >

North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

• To set the magnetic variation value manually, select User,

enter the magnetic variance, and select Done.

Altimeter Settings

Hold MENU, and select Settings > Sensors & Accessories >

Altimeter.

Barometer: Allows you to set the barometric pressure manually,

or select a value from the nearest METAR station through the

Garmin Connect Mobile app.

Altitude Alert: Sets an alarm to vibrate when you reach a

specified altitude.

O2 Alert: Sets an alarm to vibrate when you reach a low-oxygen

altitude.

Sync to Elevation: Allows you to synchronize the device to your

current elevation manually.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation.

From the altimeter widget, hold MENU.

Select Options.

Select an option:

• To enter the current elevation, select Calibrate > Yes.

• To calibrate automatically from your GPS starting point,

select Calibrate > Use GPS.

• To allow the altimeter to self-calibrate each time you turn

on GPS tracking, select Auto Cal. > On.

Barometer Settings

Hold MENU, and select Settings > Sensors & Accessories >

Barometer.

Calibrate: Allows you to manually calibrate the barometer

sensor.

Plot: Sets the time scale for the chart in the barometer widget.

Storm Alert: Sets the rate of barometric pressure change that

triggers a storm alert.

Watch Mode: Sets the sensor used in watch mode. The Auto

option uses both the altimeter and barometer according to

your movement. You can use the Altimeter option when your

activity involves changes in altitude, or the Barometer option

when your activity does not involve changes in altitude.

Pressure: Sets how the device displays pressure data.

Calibrating the Barometer

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometer if you know

the correct elevation or the correct sea level pressure.

Hold MENU.

Select Settings > Sensors & Accessories > Barometer >

Calibrate.

Select an option:

• To enter the current elevation or sea level pressure, select

Yes.

• To calibrate automatically from the digital elevation model,

select Use DEM.

• To calibrate automatically from your GPS starting point,

select Use GPS.

Elevation Settings

Hold MENU, and select Settings > Sensors & Accessories >

Elevation.

Calibrate: Allows you to calibrate the altimeter sensor manually.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Elevation: Sets the units of measure for elevation.

Map Settings

You can customize how the map appears in the map app and

data screens.

Hold MENU, and select Settings > Map.

Orientation: Sets the orientation of the map. The North Up

option shows north at the top of the screen. The Track Up

option shows your current direction of travel at the top of the

screen.

User Locations: Shows or hides saved locations on the map.

Auto Zoom: Automatically selects the zoom level for optimal

use of your map. When disabled, you must zoom in or out

manually.

Lock on Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Track Log: Shows or hides the track log, or the path you have

traveled, as a colored line on the map.

Track Color: Changes the track log color.

Detail: Sets the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Marine: Sets the map to display data in marine mode (Marine

Map Settings, page 33).

Draw Segments: Shows or hides segments, as a colored line

on the map.

Draw Contours: Shows or hides contour lines on the map.

Marine Map Settings

You can customize how the map appears in marine mode.

Hold MENU, and select Settings > Map > Marine.

Marine Chart Mode: Enables the nautical chart when displaying

marine data. This option displays various map features in

different colors so the marine POIs are more readable, and

so the map reflects the drawing scheme of paper charts.

Spot Soundings: Enables depth measurements on the chart.

Light Sectors: Shows and configures the appearance of light

sectors on the chart.

Symbol Set: Sets the chart symbols in marine mode. The

NOAA option displays the National Oceanic and Atmospheric

Administration chart symbols. The International option

displays the International Association of Lighthouse

Authorities chart symbols.

Customizing Your Device 33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin D2 Delta S in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin D2 Delta S

Garmin D2 Delta S User Manual - German - 58 pages

Garmin D2 Delta S User Manual - French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin D2 Delta S Manual

Product: