Manual Garmin Camper 890 (page 21 of 32) (English)

740394

Zoom out

Zoom in

1/32

Audio Control

Adjusting the Volume for a Zone

Select > Tools > Fusion Link > .

Move the slider to control the volume for a zone.

Muting all Connected Stereos

You can quickly mute the audio from this stereo or from all

stereos connected to the network.

From any source, select .

The mute symbol appears and audio from this stereo is

silenced.

Adjusting the Tones

Select > Tools > Fusion Link > > Music.

Select a zone.

Select Tone.

Move the slider bar to adjust the level of each tone.

Disabling the Loud Setting for a Zone

The Loud setting maintains frequency response at low volumes

and increases perceived loudness at high volumes. This setting

is enabled by default in all zones.

Select > Tools > Fusion Link > > Music.

Select a zone.

Select Loud to enable or disable the setting.

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments.

Select an auxiliary source.

Move the slider to increase or decrease the gain.

NOTE: To achieve the best audio quality when using a

portable media player with a headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

You can set the balance, volume limit, tone, subwoofer level,

subwoofer frequency, and name for each zone, and configure

other zone-specific settings (Speaker Zone Settings, page 17).

Adjusting the Audio Settings for a Zone

Select > Tools > Fusion Link > > Music.

Select a zone.

Select More.

Select one or more options:

NOTE: Not all options are available for all zones.

• To limit the maximum volume level of this zone, select

VOLUME LIMIT, and adjust the level.

• To set the subwoofer level for this zone, select SUB

LEVEL, and adjust the level.

• To adjust the right and left speaker balance of this zone,

select BALANCE, and adjust the balance.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency for each zone, which can enhance the blend of

the sound produced by the speakers and the subwoofer. Audio

signals above the selected cutoff frequency are not passed to

the subwoofer.

NOTE: If a DSP setting has been applied to the zone, this

setting cannot be changed on the stereo. You can view the DSP

setting for the optimal cutoff frequency as calculated by the DSP

controller, but you cannot adjust it.

Select > Tools > Fusion Link > > Music.

Select a zone.

Select Subwoofer Filter.

Select a frequency.

DSP Settings

Some Fusion stereos feature digital signal processing (DSP).

You can select pre-configured DSP settings for Fusion speakers

and amplifiers to optimize audio quality.

All DSP settings are configured using the Fusion-Link remote

control app.

NOTE: This feature is not available for all stereo models.

Configuring the DSP Settings

You can configure the DSP settings to optimize the sound in

each zone that uses Fusion speakers and amplifiers.

Select > Tools > Fusion Link > > Music.

Select a zone.

Select DSP Settings.

Configure the DSP settings as needed, depending on the

models of the Fusion speakers and amplifiers connected to

the zone.

Repeat these steps for each zone.

After you have finished configuring the DSP settings for all of

the zones, select Send DSP Settings.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

Saving a Station as a Preset

With an applicable source selected, tune the stereo to a

station or a channel.

Press and hold .

Selecting a Preset from a List

With an applicable source selected, select .

Select a preset.

Removing Presets

With an applicable source selected, select .

Select .

Select each preset you want to remove.

After you have finished removing presets, select .

Audio Settings

Select > Tools > Fusion Link > .

Music: Enables you to configure the speaker zones (Speaker

Zone Settings, page 17).

Tuner Region: Sets the region used by the various radio

sources.

Device Name: Sets a name for this stereo.

Searching: Enables Fusion Alpha Search Technology (FAST),

which allows you to quickly search for tracks by letter or

number. You can set the minimum number of tracks required

to enable the FAST menu. FAST searching is available when

your device contains more than this number of tracks.

Update: Allows you to update the stereo and DSP settings

software.

About: Shows the software version information for the stereo.

Speaker Zone Settings

Setting a Zone Name

You can set a name for a speaker zone to make it easier to

identify.

Using the Apps 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Camper 890 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Camper 890

Garmin Camper 890 User Manual - German - 38 pages

Garmin Camper 890 User Manual - French - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Camper 890 Manual

Product: