691403

Garmin BarkLimiter 2 Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
Fitting the Collar on Your Dog
CAUTION
To help reduce the chance of irritation, remove the collar when
not in use. You should check the fit and comfort of the collar
daily.
This device is not intended for human use. Do not attempt to
use on any person.
Do not spray the device with harsh chemicals including but not
limited to flea or tick spray. Always ensure that all flea or tick
spray applied to the dog is completely dry before placing the
collar on the dog. Small amounts of harsh chemicals can
damage the plastic components.
In order to effectively train the dog, the collar and device must fit
the dog properly. If the collar is too loose or positioned
incorrectly, stimulation may be inconsistent. This can delay or
prevent successful training.
1
Position the device at the front of the dog's neck, with the
status LED facing toward the dog's chin and the device
against the throat.
TIP: For bark correction, the device should be positioned
near the dog's vocal cords. This location varies based on the
breed of dog. If the device does not seem to detect the dog's
barks, you should move the device closer to or farther from
the dog's body to find the ideal location.
2
Confirm that the ID tags on the collar strap do not come into
contact with the device.
NOTE: ID tags contacting the device may cause
unintentional corrections.
3
Tighten the strap so that it is very snug around the dog's
neck, and fasten the buckle.
NOTE: The collar should fit tightly and should not be able to
rotate or slide on the dog's neck. The dog must be able to
swallow food and water normally. You should observe your
dog's behavior to verify that the collar is not too tight.
4
Wiggle the device to work the contact points through the
dog's coat.
NOTE: The contact points must have contact with the dog's
skin to be effective.
Garmin Canine
The free Garmin Canine app allows you to review your dog's
daily activity and get insights into your dog's behavior. The app
also allows you to wirelessly send software updates to your dog
device.
Set up bark correction: Allows the device to detect and correct
barks automatically. You can adjust the method of the
corrections. When using stimulation, you can adjust the
intensity level or use auto-rise.
Analyze your data: You can view summary data, including your
dog's daily activity level and number of barks. You can view
more detailed information about your dog's activity, including
event times and corrective actions used.
Set up family members and dogs: Allows you to create and
edit dog profiles, pair compatible dog collar devices, and
invite other family members.
Syncing the Dog Collar Device with the
Garmin Canine App
Garmin
®
recommends you sync your device daily to review
updated data in the app and receive important notifications,
such as low battery alerts and software updates.
1
Bring your smartphone within 10 m (33 ft.) of the dog collar
device.
TIP: You may need to wake the device if your dog is
stationary for a long period of time.
2
Open the Garmin Canine app.
The dog collar device periodically syncs data with the Garmin
Canine app automatically. The app indicates when the last
sync occurred.
3
View your current data in the Garmin Canine app.
Bark Correction
NOTICE
Before playing with your dog, you should remove the dog collar
device or deactivate the correction feature.
When using the BarkLimiter 2 device, you should remove all
other collars, tags, or other items from your dog. These other
items can cause the BarkLimiter 2 device to activate when the
dog is not barking.
The BarkLimiter 2 device can correct your dog automatically
when the dog barks. The device detects vibrations to distinguish
between barking and other vocalizations. You can use the
Garmin Canine app to manually adjust the amount of barking
allowed. You can allow no barking or set a custom number to
indicate how many barks are allowed before correcting your
dog. You can also allow some barking (up to 5 barks) to help
avoid unintentional corrections resulting from everyday activity,
such as yawning, sneezing, or going through a dog door.
You can use any of these methods when correcting your dog
with the BarkLimiter 2 device.
• Tone
• Vibration
• Smart mode
• Stimulation
NOTE: If you turn off all correction methods, the device
continues to detect your dog's barks without performing any
corrections. This can help you track your dog's barking behavior
using the Garmin Canine app.
Smart Mode
You can configure the bark allowance and correction type in the
Garmin Canine app. You must enable smart mode on the device
for the changes you make in the Garmin Canine app to take
effect. If the device is not in smart mode, the device reports only
the bark history.
Selecting a Training Mode
When your device is paired with a smartphone (Syncing the Dog
Collar Device with the Garmin Canine App, page 2), you can
use smart mode. You must select smart mode on the collar to
use the settings in the Garmin Canine app. When you do not
select smart mode during setup, the device defaults to the last
standard mode you used.
TIP: The device turns off when you hold the button for more
than three seconds.
2 Garmin Canine
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin BarkLimiter 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin BarkLimiter 2 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin BarkLimiter 2

Garmin BarkLimiter 2 User Manual - Dutch - 12 pages

Garmin BarkLimiter 2 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info