589669
14
Zoom out
Zoom in
Previous page
1/22
Next page
Auto Archive: Sets an automatic archive method to organize
your tracks. Tracks are saved and cleared automatically.
Color: Changes the color of the track line on the map.
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, depth, temperature, and pressure.
1Select Setup > Units.
2Select a measurement type.
3Select a unit of measure for the setting.
Time Settings
Select Setup > Time.
Time Format: Sets the device to show time in a 12-hour or 24-
hour format.
Time Zone: Sets the time zone for the device. Automatic sets
the time zone automatically based on your GPS position.
Position Format Settings
NOTE: Do not change the position format or the map datum
coordinate system unless you are using a map or chart that
specifies a different position format.
Select Setup > Position Format.
Position Format: Sets the position format in which a given
location reading appears.
Map Datum: Sets the coordinate system on which the map is
structured.
Map Spheroid: Shows the coordinate system the device is
using. The default coordinate system is WGS 84.
Heading Settings
You can customize the compass settings.
Select Setup > Heading.
Display: Sets the type of directional heading shown on the
compass.
North Reference: Sets the north reference used on the
compass.
Go To Line/Pointer: Sets the behavior of the pointer that
appears on the map. Bearing points in the direction of your
destination. Course shows your relationship to the course
line leading to the destination.
Compass: Automatically switches from an electronic compass
to a GPS compass when you are traveling at a higher rate of
speed for a period of time.
Calibrate Compass: See page 6.
Altimeter Settings
Select Setup > Altimeter.
Auto Calibration: Automatically calibrates the altimeter each
time the device is turned on.
Barometer Mode: Variable Elevation allows the barometer to
measure changes in elevation while you are moving. Fixed
Elevation assumes the device is stationary at a fixed
elevation, so the barometric pressure should only change
due to weather.
Pressure Trending: Sets how the device records pressure
data. Save Always records all pressure data, which can be
helpful when you are watching for pressure fronts.
Plot Type: Records elevation changes over a period of time or
distance, records barometric pressure over a period of time,
or records ambient pressure changes over a period of time.
Calibrate Altimeter: Calibrates the altimeter.
Geocaching Settings
Select Setup > Geocaches.
Geocache List: Allows you to display the geocache list by
names or codes.
Found Geocaches: Allows you to edit the number of
geocaches found. This number automatically increases as
you log a find.
Filter Setup: Allows you to create and save custom filters for
geocaches based on specific factors (page 8).
chirp Searching: Allows the device to search for a geocache
containing a chirp accessory (page 8).
Program chirp: Programs the chirp accessory. See the chirp
owner's manual at www.garmin.com.
Routing Settings
The device calculates routes optimized for the type of activity
you are doing. The routing settings available vary based on the
activity selected.
Select Setup > Routing.
Guidance Method: Sets the preference for optimizing route
calculation based on distance, time, on-road, or off-road
routing.
Calculate Routes for: Sets the mode of transportation for
which to calculate routes.
Lock On Road: Locks the position icon, which represents your
position on the map, onto the nearest road.
Off Road Transitions: Sets how the device routes from one
point on the route to the next. This setting is available only
for some activities. Distance routes you to the next point on
the route when you are within a specified distance of your
current point.
Avoidance Setup: Sets the road types to avoid while
navigating. This setting is available only for some activities.
Marine Map Settings
Select Setup > Marine.
Marine Chart Mode: Selects a nautical chart or a fishing chart.
Nautical displays various map features in different colors so
the marine POIs are more readable and so the map reflects
the drawing scheme of paper charts. Fishing (requires
marine maps) displays a detailed view of bottom contours
and depth soundings and simplifies map presentation for
optimal use while fishing.
Appearance: Sets the appearance of marine navigation aids on
the map.
Marine Alarm Setup: Sets alarms for when you exceed a
specified drift distance while anchored, when you are off
course by a specified distance, and when you enter water of
a specific depth.
Setting up Marine Alarms
1From the main menu, select Setup > Marine > Marine
Alarm Setup.
2Select an alarm type.
3Select On.
4Enter a distance.
Device Information
Viewing Device Information
You can view the unit ID, software version, and license
agreement.
Select Setup > About.
10 Device Information
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Astro320 - DC50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Astro320 - DC50 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Astro320 - DC50

Garmin Astro320 - DC50 User Manual - German - 24 pages

Garmin Astro320 - DC50 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info